Ultralight Radio DXing Go Case - March 2021


Paul Blundell
 

I have recently updated and improved my "Ultralight Radio DXing Go Case". As my radio collection has increased, I have needed to find a suitable way to carry my radios while still providing them with a good level of protection.

I ended up placing my 3" FSL at one end and using a piece of pine to divide this off, to the top of this I have attached a small piece of foam wrap, this goes over the top of my 3" FSL and provides some extra protection to this.

On the left hand side, I have added some dividers to keep my radios in place, this is thick cardboard which has been wrapped in duct tape, this is about the best tradeoff I could make for weight / protection. I also have my earphones, spare batteries, log sheets and notebook on this side. As my radio collection increases, I can keep adding more dividers as needed.

Overall, I am very pleased with how well this case has come out, I am able to carry and store multiple radios, log sheets, pens, notes, spare batteries and ear phones, everything I need for portable sessions. It is also small enough to fit in my backpack. For $30 it provides a great level of protection. 


While this case was designed for ultralight DXing the same ideas could be used for amateur radio, radio scanning or any other radio storage need.

 

 







Alex
 

"And it will soon be "Standard Issue"  to all Double O's in the field".......  :D 


On Thu, Mar 18, 2021 at 10:25 PM, Paul Blundell
<tanger32au@...> wrote:

I have recently updated and improved my "Ultralight Radio DXing Go Case". As my radio collection has increased, I have needed to find a suitable way to carry my radios while still providing them with a good level of protection.

I ended up placing my 3" FSL at one end and using a piece of pine to divide this off, to the top of this I have attached a small piece of foam wrap, this goes over the top of my 3" FSL and provides some extra protection to this.

On the left hand side, I have added some dividers to keep my radios in place, this is thick cardboard which has been wrapped in duct tape, this is about the best tradeoff I could make for weight / protection. I also have my earphones, spare batteries, log sheets and notebook on this side. As my radio collection increases, I can keep adding more dividers as needed.

Overall, I am very pleased with how well this case has come out, I am able to carry and store multiple radios, log sheets, pens, notes, spare batteries and ear phones, everything I need for portable sessions. It is also small enough to fit in my backpack. For $30 it provides a great level of protection. 


While this case was designed for ultralight DXing the same ideas could be used for amateur radio, radio scanning or any other radio storage need.

 

 







Michael.2E0IHW
 

Your hunting is always impressive, Paul!

I wonder what  happens at airports when they see the uranium rods . . .

Michael UK

On 19/03/2021 02:25, Paul Blundell wrote:

I have recently updated and improved my "Ultralight Radio DXing Go Case".






Paul Blundell
 

Tomorrow will be its first real world test.

Paul

On Fri, 19 Mar 2021, 20:30 Alex K., <rifleman336@...> wrote:
"And it will soon be "Standard Issue"  to all Double O's in the field".......  :D 


On Thu, Mar 18, 2021 at 10:25 PM, Paul Blundell

I have recently updated and improved my "Ultralight Radio DXing Go Case". As my radio collection has increased, I have needed to find a suitable way to carry my radios while still providing them with a good level of protection.

I ended up placing my 3" FSL at one end and using a piece of pine to divide this off, to the top of this I have attached a small piece of foam wrap, this goes over the top of my 3" FSL and provides some extra protection to this.

On the left hand side, I have added some dividers to keep my radios in place, this is thick cardboard which has been wrapped in duct tape, this is about the best tradeoff I could make for weight / protection. I also have my earphones, spare batteries, log sheets and notebook on this side. As my radio collection increases, I can keep adding more dividers as needed.

Overall, I am very pleased with how well this case has come out, I am able to carry and store multiple radios, log sheets, pens, notes, spare batteries and ear phones, everything I need for portable sessions. It is also small enough to fit in my backpack. For $30 it provides a great level of protection. 


While this case was designed for ultralight DXing the same ideas could be used for amateur radio, radio scanning or any other radio storage need.

 

 







Paul Blundell
 

Sadly given all the issues around COVID-19, I think it will be a while before I am undertaking any air travel.

Paul

On Fri, 19 Mar 2021, 20:58 Michael.2E0IHW via groups.io, <blumu=btinternet.com@groups.io> wrote:
Your hunting is always impressive, Paul!

I wonder what  happens at airports when they see the uranium rods . . .

Michael UK

On 19/03/2021 02:25, Paul Blundell wrote:

I have recently updated and improved my "Ultralight Radio DXing Go Case".






Jorge Garzón
 

I see your FSL antenna partially wrapped with American Tape on one side. Did you have any mechanical issue or just extra protection? 

Jorge

Jorge Garzón Gutiérrez "IberiaDX" 
(EB7EFA · EA1036 SWL · BDXC Member 1409) 
QTH: IN83ag / 43º15' N · 03º56' W
Urb. San Roque 95, casa 5 (Villasevil)
39698 Santiurde de Toranzo (ESPAÑA - SPAIN)
..................................................................................
Blog: IberiaDX  · Twitter: @IberiaDX


En viernes, 19 de marzo de 2021 03:25:05 CET, Paul Blundell <tanger32au@...> escribió:


I have recently updated and improved my "Ultralight Radio DXing Go Case". As my radio collection has increased, I have needed to find a suitable way to carry my radios while still providing them with a good level of protection.

I ended up placing my 3" FSL at one end and using a piece of pine to divide this off, to the top of this I have attached a small piece of foam wrap, this goes over the top of my 3" FSL and provides some extra protection to this.

On the left hand side, I have added some dividers to keep my radios in place, this is thick cardboard which has been wrapped in duct tape, this is about the best tradeoff I could make for weight / protection. I also have my earphones, spare batteries, log sheets and notebook on this side. As my radio collection increases, I can keep adding more dividers as needed.

Overall, I am very pleased with how well this case has come out, I am able to carry and store multiple radios, log sheets, pens, notes, spare batteries and ear phones, everything I need for portable sessions. It is also small enough to fit in my backpack. For $30 it provides a great level of protection. 


While this case was designed for ultralight DXing the same ideas could be used for amateur radio, radio scanning or any other radio storage need.

 

 







Paul Blundell
 

This is mostly just to stop the rods moving around too much. Gary does a great job of building these but I like to give it as much protection as possible.

Paul

On Sat, 20 Mar 2021, 20:06 Jorge Garzón via groups.io, <iberiaDX=yahoo.com@groups.io> wrote:
I see your FSL antenna partially wrapped with American Tape on one side. Did you have any mechanical issue or just extra protection? 

Jorge

Jorge Garzón Gutiérrez "IberiaDX" 
(EB7EFA · EA1036 SWL · BDXC Member 1409) 
QTH: IN83ag / 43º15' N · 03º56' W
Urb. San Roque 95, casa 5 (Villasevil)
39698 Santiurde de Toranzo (ESPAÑA - SPAIN)
..................................................................................
Blog: IberiaDX  · Twitter: @IberiaDX


En viernes, 19 de marzo de 2021 03:25:05 CET, Paul Blundell <tanger32au@...> escribió:


I have recently updated and improved my "Ultralight Radio DXing Go Case". As my radio collection has increased, I have needed to find a suitable way to carry my radios while still providing them with a good level of protection.

I ended up placing my 3" FSL at one end and using a piece of pine to divide this off, to the top of this I have attached a small piece of foam wrap, this goes over the top of my 3" FSL and provides some extra protection to this.

On the left hand side, I have added some dividers to keep my radios in place, this is thick cardboard which has been wrapped in duct tape, this is about the best tradeoff I could make for weight / protection. I also have my earphones, spare batteries, log sheets and notebook on this side. As my radio collection increases, I can keep adding more dividers as needed.

Overall, I am very pleased with how well this case has come out, I am able to carry and store multiple radios, log sheets, pens, notes, spare batteries and ear phones, everything I need for portable sessions. It is also small enough to fit in my backpack. For $30 it provides a great level of protection. 


While this case was designed for ultralight DXing the same ideas could be used for amateur radio, radio scanning or any other radio storage need.