Hi FenDrifter
I haven't tried the side band calibration. It seems to be spot on when I tune in Morse or voice on the ham bands. As far as the muted tuning I've used a Tecsun PL 600 for years and have become used to this.
73's
Ron

Hi Ron
Thanks for that tip about the antenna, I’ll keep an eye on that screw! County Comm stuff isn’t available in the UK as far as I’m aware, so I’ll just be very careful. The 365 whip is available on eBay, but I’m not certain it’s the same fitting? It’s a bit of luck your screw came out in your case! Also I wasn’t aware that the ferrite was at the bottom, for some reason I thought it was about half way up, so good knowledge there  
Thanks also for, the links you sent, I learnt that I had the wrong idea about the ‘warbling’, I didn’t realise it only applied to the side bands, but I’ve checked again it appears that has been sorted. Have you tried the side band calibration? Do I understand that it has to be done on each band separately? I’m finding it’s pretty damn close anyway, generally needing plus two on fine tuning (is that hertz?). This little wonder is slowly pushing my E5 aside because it’s much more clear, and with my failing hearing that’s a big plus! Still got a lot to learn, but it’s more fun  I’m in the process at the moment of training myself to ignore the damn muted tuning problem! Other than that this is a superb bit of miniature kit.
Drifter

 

You can switch out the Tecsun brass antenna with a stainless steel one like the County Comm model has. Theses are available from County comm and maybe even eBay. They are sturdier and the green tip is easy to get a good grip on. For some reason the screw at the bottom of this radio came loose and my whip came out of the radio! Fortunately it was in the soft case and I found the screw at the bottom of the case. I opened the radio the rest of the way to make sure the end connector on the antenna wire didn't move away from its position and I could re-screw the whip antenna back in. I saw the internal ferrite and it is tiny! Its all of 1 3/8 inches long and laying horizontally at the base of the radio. Good to know if you use an external antenna with a ferrite probe attachment or something like the ferrite stick antennas.
73's
Ron

This kiddie on SSB absolutely rocks! I have had more fun with this in 24 hours than I have with any of my previous receivers. That includes PL-330, PL-660 and my Etón E5 (which I still use because it’s just so damn friendly) and a few other old cheapies. This PL-368 is so stable and clear. I have so far mainly used it with headphones (not earbuds) so as not to upset she who must be obeyed, but the loudspeaker makes speech very clear and isn’t in my opinion tinny in any way. The only minor annoyance I’ve found is getting hold of the tip of the antenna to pull it out, not easy. I don’t quite understand why they’ve done it because previous models in this style have had the much more usable inverted cone type. This very minor issue aside I would say to anyone with an interest in shortwave to get out there and buy one immediately! They’re so cheap you just can’t go wrong. 

Drifter

Well what a turn up, brilliant, yes it worked Earl! Thanks a million, there’s so much to learn about this little gem. It would appear I have the latest firmware (3684) so hopefully all the latest hidden features will apply? I’ll have more time tomorrow to look more closely. 

All the best 
Drifter

Hi all, well my beastie arrived this morning, and I’ve been able to spend a little time with it. To clear one thing up immediately, the previously discussed problem is no longer present 🤙. I have had loads of fun with this so far and expect to have loads more in the future. My first big love is it’s clarity of speech, it’s the best I have to date. It seems to be on a par with my Etón E5 in terms of shortwave reception, but in terms of clarity the 368 wins easily. I’m not going to do a full review of this, because I agree with just about everything Jay’s said here: https://radiojayallen.com/tecsun-l-368/
My only minor gripe is the inability to lock it when it’s off, and for something I’ll be carrying in my pocket, that’s a problem. I’ve obviously got loads to learn about this yet but at this early stage I’m very happy. If anyone should have any questions they think I could answer, I’d be more than happy to. 
Drifter

Hi Jay and all
I have ordered one of these, and it will be the first thing I check when I get it; watch this space. 

Drifter

Most likely unless others report this but so far no one else has as far as I know???

I’m still impressed by your generosity, so no worries 🙂.
Drifter

Hi Earl, that’s unbelievably good of you, but you probably don’t realise I live in the UK! 
Drifter

I was thinking I might get one of those to look at, but you’ve certainly put me off Earl 😊.
Drifter

HRD747 disaster? Curious Earl.

Drifter