|
August 1-4 Rockwork Cliff Portable + FSL Antenna Highlights & MP3's
Thanks Craig, We missed you at the Rockwork Cliff, but there is always next year. All of my DU-DX was with 6 inch FSL antennas identical to yours. Good luck on the house search, and see you again late
Thanks Craig, We missed you at the Rockwork Cliff, but there is always next year. All of my DU-DX was with 6 inch FSL antennas identical to yours. Good luck on the house search, and see you again late
|
By
Gary DeBock
· #33827
·
|
|
August 1-4 Rockwork Cliff Portable + FSL Antenna Highlights & MP3's
From August 1-4 the Rockwork 4 ocean cliff near Manzanita, Oregon was once again the scenic venue for all-out DU-DXing with simple portables (CC Skywave and XHDATA D-808 models) and several 6 inch (15
From August 1-4 the Rockwork 4 ocean cliff near Manzanita, Oregon was once again the scenic venue for all-out DU-DXing with simple portables (CC Skywave and XHDATA D-808 models) and several 6 inch (15
|
By
Gary DeBock
· #33824
·
|
|
Ferrite antenna advice for LW
Hi Again John, <<< I am curious as to why the external loopstick works with only a single coil - my understanding of traditional AM receivers is that they have a primary and a secondary coil which are
Hi Again John, <<< I am curious as to why the external loopstick works with only a single coil - my understanding of traditional AM receivers is that they have a primary and a secondary coil which are
|
By
Gary DeBock
· #33757
·
|
|
Ferrite antenna advice for LW
Thanks Marc and Steve, Longwave-optimized loopstick design was a fascinating challenge, since no commercial manufacturer had ever included such a loopstick in any of their portables. It was really a "
Thanks Marc and Steve, Longwave-optimized loopstick design was a fascinating challenge, since no commercial manufacturer had ever included such a loopstick in any of their portables. It was really a "
|
By
Gary DeBock
· #33753
·
|
|
Ferrite antenna advice for LW
Hello jgriff670@..., For optimal Longwave reception on the Tecsun Pl-330, the best solution would be to replace the MW-optimized stock loopstick with an externally mounted Longwave-optimized loo
Hello jgriff670@..., For optimal Longwave reception on the Tecsun Pl-330, the best solution would be to replace the MW-optimized stock loopstick with an externally mounted Longwave-optimized loo
|
By
Gary DeBock
· #33750
·
|
|
Peru with xhdata 808
Thanks Ola, At my location Peru on MW is impossible, so we are even! For those who have interest in constructing this model (shown in the photo, along with its wacky designer) a full construction arti
Thanks Ola, At my location Peru on MW is impossible, so we are even! For those who have interest in constructing this model (shown in the photo, along with its wacky designer) a full construction arti
|
By
Gary DeBock
· #33663
·
|
|
Peru with xhdata 808
Congratulations Ola, Those are fantastic long range receptions with the 19cm loopstick D-808! I myself love to chase long range DX with that receiver. At the Rockwork ocean cliff in Oregon I made this
Congratulations Ola, Those are fantastic long range receptions with the 19cm loopstick D-808! I myself love to chase long range DX with that receiver. At the Rockwork ocean cliff in Oregon I made this
|
By
Gary DeBock
· #33661
·
|
|
ULDXIndex and MWDXerDB V22.03
I think it's time for a reality check here. Long range DX is very dependent on seasonal changes, especially transoceanic DX on medium wave. For example, here in the USA I can routinely receive transoc
I think it's time for a reality check here. Long range DX is very dependent on seasonal changes, especially transoceanic DX on medium wave. For example, here in the USA I can routinely receive transoc
|
By
Gary DeBock
· #33613
·
|
|
Australia
Congratulations, Peter! By way of reference, the longest worldwide reception using "official" Ultralight radios was made by Gary Deacon at Fish Hoek, South Africa, who received 850-KOA in Denver, Colo
Congratulations, Peter! By way of reference, the longest worldwide reception using "official" Ultralight radios was made by Gary Deacon at Fish Hoek, South Africa, who received 850-KOA in Denver, Colo
|
By
Gary DeBock
· #33419
·
|
|
Vendor of FSLs?
Hi Loyd, The 7" FSL construction article was published in October of 2011, and there have been numerous improvements in construction techniques and materials since then. Once your ferrite rods come in
Hi Loyd, The 7" FSL construction article was published in October of 2011, and there have been numerous improvements in construction techniques and materials since then. Once your ferrite rods come in
|
By
Gary DeBock
· #33381
·
|
|
Vendor of FSLs?
Hi Jim, Since FSL antennas require so many ferrite rods there has always been a demand for inexpensive rods, since the cost of the American-made material is considered too expensive by most DXers. The
Hi Jim, Since FSL antennas require so many ferrite rods there has always been a demand for inexpensive rods, since the cost of the American-made material is considered too expensive by most DXers. The
|
By
Gary DeBock
· #33371
·
|
|
Vendor of FSLs?
Hello Zacharias, I don't have a Tecsun AN-200, but I do have a Terk Advantage loop, which is considered by most DXers to be superior to the AN-200. All of the Baby FSL models here outperform the Terk
Hello Zacharias, I don't have a Tecsun AN-200, but I do have a Terk Advantage loop, which is considered by most DXers to be superior to the AN-200. All of the Baby FSL models here outperform the Terk
|
By
Gary DeBock
· #33370
·
|
|
Modified xhdata 808 ferrite
Hello Ola, Welcome to our Ultralight radio group! The 19cm (7.5 inch) loopstick XHDATA D-808 model is in high demand worldwide, similar to the demand for small FSL antennas. Unfortunately I don't have
Hello Ola, Welcome to our Ultralight radio group! The 19cm (7.5 inch) loopstick XHDATA D-808 model is in high demand worldwide, similar to the demand for small FSL antennas. Unfortunately I don't have
|
By
Gary DeBock
· #33349
·
|
|
Vendor of FSLs?
Hi again Dirk (and Nick, Paul, Peter and Phil), The short answer to your question is "no," but you can find a lot of FSL information in the Ultralightdx files and in the IRCA articles, as Nick suggest
Hi again Dirk (and Nick, Paul, Peter and Phil), The short answer to your question is "no," but you can find a lot of FSL information in the Ultralightdx files and in the IRCA articles, as Nick suggest
|
By
Gary DeBock
· #33176
·
|
|
Vendor of FSLs?
Design photo attached. Sorry, none are for sale. Gary
Design photo attached. Sorry, none are for sale. Gary
|
By
Gary DeBock
· #33165
·
|
|
Most used ULTRAlight Radio
Thanks Nick, I had almost forgotten that I had written some of those articles (lol). The early days of FSL antenna experimentation were indeed fascinating, and if we had not used so much time trying t
Thanks Nick, I had almost forgotten that I had written some of those articles (lol). The early days of FSL antenna experimentation were indeed fascinating, and if we had not used so much time trying t
|
By
Gary DeBock
· #33117
·
|
|
Welcome to All New Members
Thanks Jerry and Paul, It's great to have both of you in the group-- as well as 1000+ others! Gary
Thanks Jerry and Paul, It's great to have both of you in the group-- as well as 1000+ others! Gary
|
By
Gary DeBock
· #32959
·
|
|
Welcome to All New Members
For those of you who have recently joined our Ultralight DX group and also for those who have been with us for the duration (since late 2007), we are honored to have you in one of the radio community'
For those of you who have recently joined our Ultralight DX group and also for those who have been with us for the duration (since late 2007), we are honored to have you in one of the radio community'
|
By
Gary DeBock
· #32951
·
|
|
Head to Head Test - Digitech AR-1733 v Kmart Portable Radio (JR-61H760) - AM Band
Hi Phil, Issac, Paul and All, Phil is correct-- the new 3" Baby FSL full construction article is still in the works. I've attached design photos of the 3 inch 125mm rod FSL model that Paul uses, and a
Hi Phil, Issac, Paul and All, Phil is correct-- the new 3" Baby FSL full construction article is still in the works. I've attached design photos of the 3 inch 125mm rod FSL model that Paul uses, and a
|
By
Gary DeBock
· #32746
·
|
|
640 kHz UnID Spanish Station
Thanks Jorge, Your information about the Cuban accent and its typical programming in the 640 recording is very helpful, and agrees with what some other DXers have said about the identity of that power
Thanks Jorge, Your information about the Cuban accent and its typical programming in the 640 recording is very helpful, and agrees with what some other DXers have said about the identity of that power
|
By
Gary DeBock
· #32721
·
|