On Thu, Feb 17, 2022 at 10:24 PM, DX Central - Loyd Van Horn (W4LVH) wrote: I just rolled the dice tonight and put in an order for enough ferrite to put together a 7" FSL from Gary's link. I will be

My V115 had a built in recorder but I was not a fan of that radio. I personally take videos of anything "special" but mostly I don't record my loggings. I do keep written notes of these which I save

Hi all, I’m curious what kind of recording devices you are using when you recording from portable receiver. It is a”jungle” of different devices. Looking for an easy operate but good recorder.

Yes it is home made. Https://ultralightradiodxing.blogspot.com/2020/11/diy-ultralight-dxing-stand.html

I just rolled the dice tonight and put in an order for enough ferrite to put together a 7" FSL from Gary's link. I will be sure to total up all of the costs and report for anyone thinking of

MW FREQUENCY CHALLENGE - WEEK 12 RESULTS AND WEEK 13 ANNOUNCEMENT Congrats to Rob Keeney for climbing back to the top spot of the challenge with the most receptions from 1080 kHz. Also a big congrats

I am going to take a wild guess and say that stand is home made? Does the top rotate? Sent with ProtonMail Secure Email.

It sounds like the total cost of them is increasing to such a point that most people won't be able to afford the parts, even if they have the time and skills to build one. Sent with ProtonMail Secure

Gary ... Thank you for responding to Zacharias and leaving the link to your article ... much appreciated. ... John On 2/17/2022 9:36 PM, Gary DeBock

------------------------- **LongTermDXingProject - Report** Report Date: 02/18/2022 Report Time: 14:01:02 ------------------------- DATE: 18/02/2022 TIME: 13:30 LOCATION: Home, Launceston

On Thu, Feb 17, 2022 at 05:26 PM, James Buttons wrote: I've been interested in building an FSL, but I've always been blocked when it comes to sourcing the ferrite rods. I've seen very little concrete

On Thu, Feb 17, 2022 at 12:00 AM, Zacharias Liangas wrote: Hello Gary have you even compared your antenna with the AN 200 in terms of signal enhancement? older times I also used my basketena

Hello Gary (and group), I've been interested in BCB dxing since my youth (in the '70's) I mostly use a Quantum Loop V2.0+ purchased new (along with his phaser unit) before Gerry went SK, connected to

Echo what Issac said. For instance, I am right now working digital modes on 12m. There are areas I cannot hear right now because propagation doesn’t favor it. If you were observing you may be

- One station might be closer than the other? - Band conditions could be different at the two locations - Power? One HAM might be uisng 100 watts. The other might be using 5watts or 500watts Sent

The same would be true of other ham transmission modes. It is also true in the area of maritime coastal weather stations and their communications with vessels. Another reason could be greater power

I am also learning this for the first time thank you

Nice catch Paul.

It depends on where you are located compared to the two stations.

The 1/2 megawatt HLSR 1170 Gimje, South Korea way on top of 300 mile distant KJNP North Pole, Alaska (25KW) Paul