Hello All, A second FSL-powered Tecsun PL-380 model has been developed with sensitivity and selectivity comparable to the original 3" Bar FSL model introduced in December-- but with a greatly

I use sill sealer available at any home improvement store. Make sure to get the type without the ripples. The oatey foam comes with a big metal staple in it, causing deformation. Ryan

Anyone have an extra piece of 4" Oatey foam to spare, Will pay for it. Can't locate any around here. Will the small type bubble wrap work? Thanks, Jerry WWØE

Anyone have a piece of 4" Oatey foam to spare, Will pay for it. Can't locate any around here. Will the small type bubble wrap work? Thanks, Jerry WWØE

RE: << While at the Post Office the other day, I saw 12" long red "foam doodles" hanging on the boxes/packaging rack. $2.99 each. >> The USPS will send you up to say, 10 air-foam padded enclosures,

Hello All, Late last year the first FSL antenna specifically designed for portable DXing was directly transplanted into a Tecsun PL-380 model-- an experiment which exceeded expectations in every

While at the Post Office the other day, I saw 12" long red "foam doodles" hanging on the boxes/packaging rack. $2.99 each. Jerry WWØE

Hi Ryan, <<< Just wondering if the tweak of adding a shielded ground to the two litz wires between the FSL and radio applies to the 100mm original version as well? >>> Yes, Ryan, it

Gary, Just wondering if the tweak of adding a shielded ground to the two litz wires between the FSL and radio applies to the 100mm original version as well? Ryan

• Terms of Use Radio Shack 12-586 for sale.AM/FM. Great AM sound and reception Contact me at ww0e@q.com. Jerry. .

Hi Phil, <<< The web page at the link to C in your parts list says 'Big Boss Noodle 58" Long x 4" in Diameter' at the top of the page and 'Big Boss Noodle 58 inches x 3.5 inches in diameter' in

Gary, The web page at the link to C in your parts list says 'Big Boss Noodle 58" Long x 4" in Diameter' at the top of the page and 'Big Boss Noodle 58 inches x 3.5 inches in diameter' in the

Hello All, The final tweak to the new "Pest Control" FSL-powered PL-380 was to add a shielded ground to the two Litz wires as they run between the cabinet and FSL antenna,, in order to stop them

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ultralightdx group. File : /6 Alignment & Modification/3 Inch FSL Tecsun

http://www.ebay.com.au/itm/BLACK-Military-Tactical-Molle-Hunting-Vest-Paintball-Jacket-SWAT-Airsoft-Army-/231797852595?hash=item35f83a89b3:g:t3IAAOSwEetV-L9W

Hi all, Works great on my Pl 390. Glad it worked for other pl 300 series radios. 73's and Thank you, Paul Juarez Sent from my HP Slate 7 Extreme Tablet

For those with interest to build this "spinoff model" of the original 3" FSL Tecsun PL-380, here is a list of the construction parts required. All of these parts are readily available, either from

A Tecsun PL-390 observation... For being a "lower end" DSP non-SSB receiver / portable, over the last few years and again recently, the Tecsun PL-390 has gained a positive response, overall good

Thanks for the reply Tony on comparing the two radios. Does the 380 have a shorter ferrite rod, than the 606? Does the 380 have a way of keeping the light on? Thanks! 73 Dave in Indy

Sorry guys for premature send. Thanks to Paul for his lead to the You Tube video on cancelling soft mute on the Tecsuns and hence increasing the gain. Have been busy on the VF button ! Tony in ZL