|
Re: Tecsun PL-310 vs PL-380
Thanks Gary, that's good to know for the future (not that I am planning to do any travelling for a while, due to COVID).
j
Thanks Gary, that's good to know for the future (not that I am planning to do any travelling for a while, due to COVID).
j
|
By
jcfontario
·
#29490
·
|
|
Re: PL-606 sticky buns ...
It seems I have made a great error. It was not my PL-600 but my venerable RS DX-440 which has the rubbery push buttons.that developed the gummy decomposition. I don't know if there is a membrane under
It seems I have made a great error. It was not my PL-600 but my venerable RS DX-440 which has the rubbery push buttons.that developed the gummy decomposition. I don't know if there is a membrane under
|
By
Ron Layton
·
#29489
·
|
|
Re: Tecsun PL-310 vs PL-380
Hi John,
A "supercharged" Skywave refers to a model with a 7.5 inch transplanted loopstick. This modification greatly increases MW band sensitivity compared to the stock CC Skywave, transforming the
Hi John,
A "supercharged" Skywave refers to a model with a 7.5 inch transplanted loopstick. This modification greatly increases MW band sensitivity compared to the stock CC Skywave, transforming the
|
By
Gary DeBock
·
#29488
·
|
|
Re: Tecsun PL-310 vs PL-380
Hi Gary,
I have a CC Skywave portable radio, but I am not familiar with what a "supercharged" Skywave receiver has that I don't have. What do I need to add to my travel portable?
Thanks
John Fisher
Hi Gary,
I have a CC Skywave portable radio, but I am not familiar with what a "supercharged" Skywave receiver has that I don't have. What do I need to add to my travel portable?
Thanks
John Fisher
|
By
jcfontario
·
#29487
·
|
|
Re: Tecsun PL-310 vs PL-380
Thus spake our resident Ultralight and FSL experimenter/developer extraordinaire. I can happily attest to Gary’s Ultralight and FSL prowess.
73,
Craig Barnes
Wheat Ridge, CO
Thus spake our resident Ultralight and FSL experimenter/developer extraordinaire. I can happily attest to Gary’s Ultralight and FSL prowess.
73,
Craig Barnes
Wheat Ridge, CO
|
By
C B
·
#29486
·
|
|
Re: Tecsun PL-310 vs PL-380
Hello All,
When both the original PL-310 and PL-380 were introduced by Tecsun in 2009-2010 they were fully reviewed (at http://www.mediafire.com/file/w4yuzhj2kyz/Tecsun_PL-380_Review.pdf/file for
Hello All,
When both the original PL-310 and PL-380 were introduced by Tecsun in 2009-2010 they were fully reviewed (at http://www.mediafire.com/file/w4yuzhj2kyz/Tecsun_PL-380_Review.pdf/file for
|
By
Gary DeBock
·
#29485
·
|
|
Re: PL-606 sticky buns ...
<micron327@...> wrote:
I wasn't clear in my description. At all. It isn't that my fingers
stick to the keys (no rubber on the exterior, thankfully, metalized
plastic) it's that the
<micron327@...> wrote:
I wasn't clear in my description. At all. It isn't that my fingers
stick to the keys (no rubber on the exterior, thankfully, metalized
plastic) it's that the
|
By
Peter Laws
·
#29482
·
|
|
Re: Tecsun PL-310 vs PL-380
I do love the preset tuning on the 310et! Press a button to get into VM mode and tune through them with the tuning knob. So much quicker and more intuitive than the banks (Pages) of seven presets each
I do love the preset tuning on the 310et! Press a button to get into VM mode and tune through them with the tuning knob. So much quicker and more intuitive than the banks (Pages) of seven presets each
|
By
Gord Seifert
·
#29481
·
|
|
Re: PL-606 sticky buns ...
My PL-600 developed a bad case of gummybearitis and the cure is hi proof isopropyl alcohol as given above. I'm fortunate to own a few gallons of 99.9% so cutting it down with the appropriate amount of
My PL-600 developed a bad case of gummybearitis and the cure is hi proof isopropyl alcohol as given above. I'm fortunate to own a few gallons of 99.9% so cutting it down with the appropriate amount of
|
By
Ron Layton
·
#29480
·
|
|
Re: Tecsun PL-310 vs PL-380
I love the "Tecsun way" of tuning - I love the ETM feature on the smaller models, which basically works like "Page 0" on the bigger ones. Love that you can switch between dedicated VF/VM modes so you
I love the "Tecsun way" of tuning - I love the ETM feature on the smaller models, which basically works like "Page 0" on the bigger ones. Love that you can switch between dedicated VF/VM modes so you
|
By
James Fields <james.v.fields@...>
·
#29479
·
|
|
Re: Tecsun PL-310 vs PL-380
As far as I know soft-mute can be de-activated on both receivers.
I find the recessed tuning-knob to be advantage rather. If you travel a lot and take your pl-310 in an out of your suitcase
As far as I know soft-mute can be de-activated on both receivers.
I find the recessed tuning-knob to be advantage rather. If you travel a lot and take your pl-310 in an out of your suitcase
|
By
Rémy Friess
·
#29478
·
|
|
Re: Tecsun PL-310 vs PL-380
Here's what I recall, but please, double check it... This is top of my head:
PL-310
Goods: antenna jack; real, external tuning knob (you can use two fingers)
Not so good: noticeable soft-mute, in
Here's what I recall, but please, double check it... This is top of my head:
PL-310
Goods: antenna jack; real, external tuning knob (you can use two fingers)
Not so good: noticeable soft-mute, in
|
By
h. garcia
·
#29477
·
|
|
Re: Tecsun PL-310 vs PL-380
I had a similar problem with the tuning knob of my Tecsun PL-660 once. It seems this happens if the set (or the knob) has not been used for a while.
I turned the knob for about 15 minutes at high
I had a similar problem with the tuning knob of my Tecsun PL-660 once. It seems this happens if the set (or the knob) has not been used for a while.
I turned the knob for about 15 minutes at high
|
By
Rémy Friess
·
#29476
·
|
|
Re: PL-606 sticky buns ...
I don't have a 606 but if the buttons have a rubberized coating, they deteriorate overtime and do get sticky. Isopropyl (rubbing) alcohol will remove the stickiness (and also the coating!). i used the
I don't have a 606 but if the buttons have a rubberized coating, they deteriorate overtime and do get sticky. Isopropyl (rubbing) alcohol will remove the stickiness (and also the coating!). i used the
|
By
kevin asato <kc6pob@...>
·
#29475
·
|
|
PL-606 sticky buns ...
OK, sticky BUTTONS. AFAIK, I've never spilled anything on the '606
but the buttons are either hard to press or seem sticky. Have not
taken it apart yet and not really afraid to, but thought I'd ask
OK, sticky BUTTONS. AFAIK, I've never spilled anything on the '606
but the buttons are either hard to press or seem sticky. Have not
taken it apart yet and not really afraid to, but thought I'd ask
|
By
Peter Laws
·
#29471
·
|
|
Re: Tecsun PL-310 vs PL-380
Op 16/05/2020 om 11:56 schreef Nick B.:
There is a nice made antenna made for the silabs chip, one for AM, the other for LW, "made in Greece".
AM: https://www.sv2czf.com/rla200.html
LW:
Op 16/05/2020 om 11:56 schreef Nick B.:
There is a nice made antenna made for the silabs chip, one for AM, the other for LW, "made in Greece".
AM: https://www.sv2czf.com/rla200.html
LW:
|
By
Marc Coevoet
·
#29470
·
|
|
Re: Tecsun PL-310 vs PL-380
By 310 I presume you mean the PL-310ET, which is the model currently available.
I own three of the cheaper Tecsun DSP models – PL-310ET, PL-380 and PL-606. Out of the three, the PL-310ET is the
By 310 I presume you mean the PL-310ET, which is the model currently available.
I own three of the cheaper Tecsun DSP models – PL-310ET, PL-380 and PL-606. Out of the three, the PL-310ET is the
|
By
Nick B.
·
#29469
·
|
|
Re: 1710kHz HudsonCounty NJ
The temporary authority has the Callsign of WRFK637... not the general Callsign above.
Just found it.
Regards
Paul S. in CT FN31nl
The temporary authority has the Callsign of WRFK637... not the general Callsign above.
Just found it.
Regards
Paul S. in CT FN31nl
|
By
Paul S. in CT
·
#29468
·
|
|
Re: 1710kHz HudsonCounty NJ
From the FCC database...
Callsign: WQFG689
Licensee: County Of Hudson Radio Service: Public Safety Pool, Conventional (PW)
City: Jersey CIty, NJ
Status: Active Grant Date: 04/14/2016 Expiration:
From the FCC database...
Callsign: WQFG689
Licensee: County Of Hudson Radio Service: Public Safety Pool, Conventional (PW)
City: Jersey CIty, NJ
Status: Active Grant Date: 04/14/2016 Expiration:
|
By
Paul S. in CT
·
#29467
·
|
|
1710kHz HudsonCounty NJ
A TIS station in Hudson Co. NJ on 1710kHz has received authorization to temporarily increase power from 10 to 100 Watts. Here on the East Coast I have heard this last nite and early this AM. A message
A TIS station in Hudson Co. NJ on 1710kHz has received authorization to temporarily increase power from 10 to 100 Watts. Here on the East Coast I have heard this last nite and early this AM. A message
|
By
Paul S. in CT
·
#29466
·
|