Call change is logged on my little Sangean DT160. Heard spot for San Diego Honda dealers and promo for Mark Larson Show. 0800 PDT top of hour call letter ID read very quickly then into CBS news.

<<< Hi Gary, Your new 6 inch FSL is a step towards higher gain in a relatively small package. I look forward to a YouTube review. >>> Thanks Todd, The master plan behind this new 6" FSL design was

Thanks for saying what I was thinking! Isn't this just a variation to the solder pot? 73, kevin kc6pob

Great post and interesting comment on the wife finding the spoon, I think some might prefer we were doing drugs and not playing radios.

Just a comment about soldering litz wire after seeing Gary's comment about a 65 watt iron..  I have a had success using a stainless steel spoon set on a burner of the stove. You will probably need

Ah ok. Iv'e been hearing 4QL from Longreach coming in at night lately. I'll listen in during the day.

Date: 1/07/2020 Time: 19:30 Location: Home, Launceston Tasmania Notes: Early evening session at home.

Hi Gord (and Todd), Todd, thanks for your interest and questions about the new 6" FSL design, which I plan to answer in detail within a day or so. Gord, 660/46 Litz wire was actually used in all of

Hi guys. I am mainly a lurker here but this post forces me to ask a question. If the Q of the 1162 strand Litz is bordering on too high, why not use 660? The price of 100 ft. of 660 is about the same

Hi Gary, Your new 6 inch FSL is a step towards higher gain in a relatively small package. I look forward to a YouTube review. Regarding 1162/46 Litz wire used in the 6" FSL, what is the cheapest

Nope, 7SD still going.

That is a very good idea, I will try the same with mine.

Thank you Gary! It's a great way to practice the hobby anywhere. Best to you.

2CA 1053 kHz has been coming into Melb well too lately. I take it 540 kHz 7SD has been shut down then. Regards. Dan.

Paul, The solution is a "rubber locking tab," which is precut on one side to fit around the curved PVC fitting, and cut flat on the other side to fit up against the rubber plumbing coupler. The rubber

Thanks Get, I have had both those issues. What are the fixes?

<<< Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions. FSL Antenna Demo with Tecsun PL-660This FSL uses

Thanks, Paul!

Awesome work. Paul https://ultralightradiodxing.blogspot.com/ -- Paul

Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions. FSL Antenna Demo with Tecsun PL-660 This FSL uses 140mm