Hello All, If you were to receive Djibouti-1431 on astock pocket radio on the East Coast (5,906 miles), would you feel deserving ofan award? How about receiving VOA Thailand-1575 on a stock

I have noticed that the E100's display is off by 1 KHz...to correctly tune 640 KHz, one would have to tune in on 641 KHz. This is true on sw frequencies as well. Perhaps this explains the disapperance

Gary, I understand what you are saying - that with a small plastic radio andnoise hitting the circuitry, shielding the loop stick is unlikely toimprove rejection of noise from the local environment -

Fortunately my E10 does not suffer from this problem.

Hello all, I received my E100 from Durham Radio today. It sure is small; it looks like a shrunken E10 (yes, I have one of those too.) Overall, I like the radio, but it does have some quirks. For

John, Ultralight radios, by nature, are plastic-enclosedelectronic devices subject to RF noise issues. Shielding the leads toexternal ferrite bars wouldn't accomplish much, since the RF hash

Hi Gary, Your comments on the Durham Radio E100 are prettytypical. I've had four Durham E100's for alignment, and these all actabout the same. Out of the box, high-band sensitivity is usually

I've just uploaded an updated Firsts and Records list to the UltralightFiles area of DXer.ca. Records as of mid-May 2008. Only onechange in the past month: Allen Willie of Newfoundland was the first

When I went to Easter Island last year, I took with me a Ramsey active antenna based on a 5/8" x 6" ferrite rod. The Ramsey PR bragged about its Faraday shielding and the fact that the antenna

Hi John, Dirty rat, indeed! :>) Right after I posted my E100 7" transplant progress report, I noticed photos of your E100 12" transplant project. This was after I had increased the

Gary, you dirty rat! I had hoped to beat you to one of the transplants... as you say, theeasiest, the E100. Unfortunately, packing for our migration to theNorthwest has stalled progress on my 12"

I know it's not an ultralight but has anyone been inside an E10? The MW could use a little help. good news **perfect** easiest Ultralight somebody double-coil piggybacked probably doing a secure

Hey Gary: Any guesses as to whether this applies to the e100 version I have with the immovable coil? I am hoping that if the basic circuitry is the same, maybe the transplanted loopstick (0.297 mH)

Hey Kevin, I remember that stuck loopstick of your E100 verywell. The good news is that any stuck, crippled, mangled or brokenloopstick is a **perfect** candidate for a transplant! And the

Hello Guys, It what was probably the easiest AM-DX loopstick transplant ever performed, a 7" loopstick from a Channel Master Super Fringe (model 6515) was soldered into an E100, resulting in

I'm planning to power my E100 two D cells under some circumstances,through the DC input port on the side. That port is also used for wallwarts, of course. the size of plug is 4.0 mm outside dia. and

Gary, I've had quite a different experience with the three E100s that I'vealigned in the past week. Only one of them came from Durham, BTW. On two of the three, I got a significant improvement on the

Hello Guys, After receiving two more Eton E100's from Durham Radio via eBay today (at $49 plus shipping), they were immediately tested and aligned. First of all, Eton's design for this

Gary, There are others involved in the Definitions Committee and the Solomoniacdecisions about what is and what is not an Ultralight, but I was party tomuch of the discussion as chairman of Firsts and

Hello all, Has anyone tried a Grundig G6 Aviator? It appears to be slightly smaller than an E100, it's dual conversion, and it has SSB. If it performs well, it seems like it would be a good addition