I figured out why my E10 wasn't working up to expectations. I realized that I hadn't charged the batteries for quite awhile so I did that (inside the radio) and everything seems fine now. I remember

I noticed that my 2 SRF-M37,s were different.The first one i bought was the v model with the soon to be useless tv audio band(actually , it is already useless but will certainly be useless after

You're welcome, John. One thing to keep in mind is that the 7600GR is about the same size as the E10, so it's a lot bigger than the E100 or G6. Hopefully it's still small enough for your

Thanks for the comments, guys! Sounds like there is a7600 in my future, too. John B. At 11:43 PM 8/31/2008 +0000, you wrote:

Hey John: I'm in agreement with everything Gary says. I also like the 3-point-something khz SSB filter for ECSS work - SSB is quite usable after the BFO has 15-20 minutes to stabilize (initially, it

Hi John, Yes, the 7600GR has "real SSB." There is a switch on the side of the radio to select USB or LSB. The smallest discrete tuning step (and display increment) is 1 kHz. There is an analog SSB

Hi Guy, Thanks again for the suggestion ofdrilling small holes in the DT-400W's digital board, to gain access to the1400 kHz trimmer and AM IF transformers on the RF circuit board.

Gary, Thanks for your comparison of the 7600GR, the E10 and the E100. Veryinteresting. I'm still looking for a small spotting receiver and Iknow that Gary DeB really likes the 7600GR. Could you help

Hi Kevin, I live in Simi Valley, about 50 miles from KFI's location. I was originally thinking along the same lines, but I don't have a strong local on 1550, and rotating the radio doesn't change

Gary, Just anotherthought on this. What I did on another radio I've owned (can't remember which model), I noted that there was a small amount of unoccupied PCB directlyabove the trimmer. That is,

Hi Gary: I see you're on pacbell.net, which probably means that KFI-LA on 640 is butting heads with an image from KYCY-San Francisco, KXEX-Fresno, or KWRN-Apple Valley on 1550, depending on where you

Hey Gary: You may be hearing an image two IF freqs (2 x 455 = 910) down from a strong local, which is heterodyning with another station on 640; do you have a fairly strong local station at 1550? I

Hello all, While comparing my E100 to my 7600GR and E10 -- all of which have 1 kHz tuning steps -- I hear hets near 640 kHz only on the E100, not on the other two radios. So these hets are internally

Hi Dennis, I compared the performance of several of my MW radios today, including the 7600GR, E10, E100 and DT-200VX (all of which are stock with no post-factory alignment). The E10 is much better

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ultralightdx group. File : /Galassi, Italy/WEGP 1390.rm Uploaded by :

Gary, Is it possible toadjust the 1400 kHz trimmer by alternating between disassembly as needed toaccess the trimmer, making a small tweak to the cap, and reassembling it enoughto check? With enough

Hi Guy, Thanks for your suggestion about a possible 1400kHz trimmer adjustment procedure for the DT-400W. As we recall, when you developed yourDT-200VX alignment procedure, on the

Gary: I got the DT-400W that isn't as sensitive as my SRF-M37W and SRF-59 (my third) I use for DXing. It is only better at the lower end of the AM band than the E100. I guess I'll order another

Hi Richard, I'm sorry that your new DT-400W isn't performingto your expectations, and yes, with other models there has been a widevariation in quality control at the Chinese factories for

Hi Guys, Pretty decent conditions last evening as I added another 19 stations to my Robert Ross 30 Day Challenge list. Total now standing at 202 so far Transatlantics and domestics were both