I have recently been out this way and have noticed that the signal is not great until very close to the TX site, I strongly suspect that either the transmitter or aerial are faulty.

My first favorite is obviously 7ZR 936, it landed me on national TV This was my second favorite, MR4 Nemzetiségi Adások, 1188khz Hungary from Sun Jan 17, 2021 at 905AM Ak time 1805UTC. The signal

On Mon, May 24, 2021 at 12:27 AM, Mark Roberts wrote: The situation in the United States is not one that would indicate that HD is the future of radio. In the San Francisco Bay Area, one of our two

Hi Peter/Paul/Mark, Super interesting, thanks for the "education", that is very enlightening! It's kind of weird how this technology of translators has kind of "morphed" over time, providing value to

Soft mute disabled by button 3 73 David

On Tue, Jun 1, 2021 at 06:11 PM, Peter Laws wrote: Where are you in relation to their (alleged) contour? https://publicfiles.fcc.gov/am-profile/wfas/contour-maps/I am well within the limits of the

To disable the soft mute, with the power on, push the "Page"button, and while the menu indicator flashes on the display, push the s-mute (#3) button until the desired setting is shown on the

How do you disable the soft mute on DT800?

The locals (OKC market) *only* advertise the analog FM translator's frequency and *never* mention their better quality HD signal which is on a full-power FM. OK, maybe not never, but certainly not

The original purpose of FM translators was essentially the same as for TV translators. However, FM translators in the United States were much more restricted. Commercial FM stations can't own a

Where are you in relation to their (alleged) contour? https://publicfiles.fcc.gov/am-profile/wfas/contour-maps/ Digital is better farther than analog but when it stops being good .. it stops.

WFAS-AM (1230 KHz) in White Plains, NY - a low-power daytime station with almost no audience, inexplicably converted to IBOC "("HD Radio") digital-only MA3 mode on May 22. Perhaps Cumulus is testing

Some YT reviewers have noted the DT-800 to have a relatively high noise floor on AM. Perhaps what you are observing, explains where that comes from in that most YT reviewers do not use headphones for

Op 1/06/2021 om 08:29 schreef kevin asato: I have replaced the standard loop from a tuner with a self made loop, I measure for the value of INDUCTANCE, and make such a loop (mostly around 12µH)..

[there are embedded links for illustration purposes rather than having everyone suffer with my artwork] Schematically, the FSL and Terk resemble a tuned LC circuit.; the difference is that the Terk

It sounds like a display issue if this changes but it stays on the right station. I find these CCR to be a mixed bag. Paul

Well. yes. A FSL is supposed to increase selectivity over a very small frequency range to aid in finding that one station buried adjacent in frequency of a higher powered station. Not just the FSL but

Here (Tasmania) they serve two main purposes: - To provide coverage in areas the main transmitter does not reach. As an example, our main transmitter site for FM radio is Mt Barrow, this provides a

The font size was unintentional as was the big empty space; artifacts from copy/paste from notepad. Sorry.

Hello to all members. Have had the above radio for a few years. Always worked fine. Also have always had a heck of a time trying to figure out how to properly operate this radio as the manual is all