Colin, In my reply to you, yesterday in message #7779, last sentence contains the pinout of the stock filter: "On 50J, the stock filter, pinout: The pins on the filter are left to right on the

I have a photo studio with a some really good macro lenses I have every intent to doing this right and putting it on my dxer.ca website. Should be helpful.

I would encourage to those guys who performed the mod, to edit & publish a tutorial who will benefit many fellows that find this receiver so ubiquitous and are aware of its sensitivity, but live

ok. unit apart... what are the in, out and ground on the m37 board? i cannot make out which goes where on your photos...

ok. unit apart... what are the in, out and ground on the m37 board? i cannot make out which goes where on your photos...

The following 4 stations were all heard on the SRF-59 barefoot. WARF 1350 Akron,OH. 2.3.10 2121-2134 EST.Akron Zips vs. No.Illinois basketball post game show."Fox Sports 1350"i.d. poor. WIXI 1360

Hi to All: Here are technical specification for TECSUN PL 360 I managed to get from Anon-co. Does someone knows, based on this specification, is PL 360 a good performer, on AM and FM. Say in

Thank you so much -- This group rocks!

Hello All, For those who have yet to order a Tecsun PL-380, PL-310 or PL-360 from thetop-rated eBay seller "Anon-co," Joyce will upgrade the shipping of yourradio to the express mail service (EMS)

Yes, You guessed it! Rob submitted his list of 800 Stations lateyesterday to become our first holder of the Heard 800 Stationsaward. His award is in the Unlimited category, but most of thereceptions

Rob: I'm further behind than I wish. After achieving 700 I concentrated on trans-oceanic DX with limited success. Finally, this evening I broke a long drought and logged station #743, catching a

RichardA wrote: Thanks Richard........but hey...you can't be too far behind?? Where areyou sitting now??? Don't forget Folks...it was Richard who was the FIRST to hit 700....andhe was the Inspiration

--- In ultralightdx@..., gratiscomputer wrote: > > > Unfortunately, I do _not_ believe in this construction: > > http://i.ebayimg.com/20/!Bk)gSCgBmk~$(KGrHqEH-D8EtW,EFpJ5BLY7)vWIBQ~~_12.JPG > >

D1028Gary@... schreef: Unfortunately, I do _not_ believe in this construction: http://i.ebayimg.com/20/!Bk)gSCgBmk~$(KGrHqEH-D8EtW,EFpJ5BLY7)vWIBQ~~_12.JPG The coupling of the antenna plus

Congratulations on your fine achievement Rob --- I mean staying married while logging an amazibg 800+ stations on your ultralight! (G)

2.2.10, 2236, am 1430, CHKT, Toronto, ON, 319m/513km, Sony SRF-M37V, 50k/50k, in Chinese 2.2.10, 2303, am 560, CFOS, Owen Sound, ON, 232mi/374km, 7.5k/1.0k, Sony SRF-M37V 2.3.10, 1258, am 1020, KDKA,

http://www.euroquartz.co.uk/Portals/0/ceramic-lts-450w.pdf Try this link for pinout. Other one was dead. Gi

I thought I would post a picture of the torch used to solder in the chip for those interested. It actually belongs to my ex wife who purchased it to do jewellery work from eBay in the UK it only cost

I cut and pasted this from directions I sent another ULRer. Assuming you have this filter (sorry for the helter-skelter appearance): "Look at the pinout scheme at

I cut and pasted this from directions I sent another ULRer. Assuming you have this filter (sorry for the helter-skelter appearance): "Look at the pinout scheme at