--- In ultralightdx@..., "wa8lcz" wrote: > 1360 WMOV Ravenswood WV 0723 EST 5k day only newstalk 256 mi Best of the bunch, Byron! This is a real WV logging. WWVA's transmitter site is, I believe,

Feb 17 1410 WRMN Elgin IL 1800 EST 1k 500W NEWSTALK . Feb 18 1360 WMOV Ravenswood WV 0723 EST 5k day only newstalk 256 mi 1240 WATT Cadillac MI 1754 EST 1k k 171 mi 1240 WCBY Cheboygan MI 1756 EST 1k

The 2010 does not have DSB (Dual Sideband) sync...you select either Upper or Lower sideband sync by fine tuning until either the Upper or Lower Led lights up. Jay Allen

--- In ultralightdx@..., "Wolfgang H" > The DX-specialist receivers are not at the market till now. We should wait for them and demand them. The classical DX-receiver producers will die because of

Hello Ultralight Radios There is a big step in the technique of radios generally by: We have the advantage that by newer technique there is a lot of progress working - Sharp shape factors in

I tried an E1...it's sensitivity off of the whip was similar to the G5. I was hoping for a miracle off of the whip (which I'm sure isn't possible to engineer, but hope springs eternal...) Of course,

Hi Powell, Actually the Sony 2010 has SSB sync (USB or LSB), but not DSB sync. I've owned one for about 24 years. I owned several E1XM units, but never got one that worked totally right. The best

--- In ultralightdx@..., "Powell" wrote: > > You would think with all the DSP power that can be written into the chips they would have done a better job. I guess they don't think the market is

The Sony ICF-2010 has DSB sync, but I hear the E-1's is superior. I often get very strong selective fades on WLAC, and with the G3 it gets rather upset on these deep fades. It doesn't bother the 2010

Hi Richard, I believe the post on ABDX regarding the IBOC digital sideband layout, and the resulting interference, is correct. One other thing to keep in mind is that KNX itself is an IBOC station.

--- In ultralightdx@..., Richard Berler > The G3, by contrast, is sensitive below around 1100 KHz, and much less by the time frequencies above 1400 KHz are tuned in. The situation improves when

Jim... The G3, like the 7600 GR, has a clarifier wheel for the BFO...continuous adjustment as opposed to incremental. It does remain stable. ECSS tuning works, and is a good backup when lower

Byron, Thanks for the kind words. Don't have any of the ones you listed. Will probably be some time before I do as I keep hearing the same ones over and over. Haven't even thought about trying to

--- In ultralightdx@..., "Wolfgang H" > > Hallo Jim, > > as far as I understood the technique of decoding SSB, there is a relationship to AM-decoding. > > In AM, the software-author takes two signal

--- In ultralightdx@..., Richard Berler wrote: > > Thanks, Jim. > > Is an allignment of the BFO a big job? Richard, I saw the reply on ABDX, and that could explain what's happening. I don't know

Hallo Jim, as far as I understood the technique of decoding SSB, there is a relationship to AM-decoding. In AM, the software-author takes two signal parts of the total AM-signal after decoding and

Thanks, Jim. Is an allignment of the BFO a big job? Heatwave

Hi Tony, Congrats on 20 States Heard. wonder if have any i don't have yet ? how about ME, NH, VT, DE, AL, SD ????? Have you built your indoor loop antenna yet ? it will be necessary to get the hard

Synchronous and SSB-ECSS detection depend on a locally generated signal at the intermediate frequency (IF). To allow the use of a single bandpass filter at the IF, that locally generated signal

Congrats Jim! It was a fun contest. I'm still in the 280's (282) with the logging tonight of XENZ-890. I've only got about 52 Colorado stations and around 27 Mexican stations. Mexico is the easiest