Umm... can't find the box and it was more than I wanted to pay, but it's enercell brand, catalog number 273-315 and came with a range of tips and voltages (1.5 - 12v), reversible polarities. OK, I

Stu: Do you have a stock number for the RS adapter? Others I've got there were anything but quiet. Thanks - Kevin S Bainbridge Island, WA

Hi all: I am seeing the new Tecsun PL-210 getting some buzz. While not available on eBay just yet, several Taobao sellers have it up for sale, and it could be had for about $50-60 delivered via a

As soon as my 390 rolls in, it will take on the 310 and 380 for a little MW shoot-out, as well as Rachmaninov's Piano Concerto #2 to see how well it functions as an mp3 amplifier! And thanks to Keith

Anyone wishing to understand the signal strength readings on Si4734 receivers, should go to the list website and do an advanced search for the string "G8 signal strength readings". This thread dates

Anyone, Listening to WGFM, Cheboygan, MI on 105.1 this morning. Very good signal with RDS displaying 105.1 N10. Does anyone happen to know what that means? First time I've seen anything like this.

Interesting. I'll be looking forward to reading more. :) What, if you remember, was the dBu reading? My PL-380 maxes out at 63dBu (although I've heard yours will read higher). I've rated signals

Hi Stephen, Thanks for your multiple posts, during this Oregon DXing trip. Sorry that there is limited time here to answer emails, but I'll try to respond in detail after returning to Puyallup.

Sounds like you're in ULDX heaven. :) Here, though, I'm almost in ULDX hell, as I have yet to log a single TP with my PL-380 even with the Select-A-Tenna. I'm sure it doesn't help that I have

Hello All, Thanks to both Patrick and Tony for the suggestion of Noumea, New Caledonia as the likely French station heard on 666 kHz here in Lincoln City, OR this week. This was never heard during

I would be interested to know too. Also, Sarmento, you say it doesn't overload the front end of your 7600GR, which is an issue for me with my PL-380. How close are you geographically to your local

Hi Sarmento! Is the “ultralight ferrite loop” a tuned or an unturned loop?Could you post some details of construction? Raphael From:ultralightdx@... [mailto:ultralightdx@...] On

Hi, I've just purchased a Tecsun PL380 in order to have it tested for MW Dxing. I mainly intend to use it with magnetically coupling loops, both ferrite and air coil. I have read something about it,

You are correct on the RSSI and S/N. I mentioned it was a cursory test last night. All of about 45 minutes at about 6:00 PM local. I had the three radios out checking on some marginal locals. I did

Hi I am need for help. I am a newbie to UL Dx. I live in the Rockies were DX is good TA's And a Few TP's on my comunications reciver with loop. Now I want to Join the UL revolution! I dx the

I'd love to see the results of a 390 vs 380 head to head MW sensitivity/soft mute comparison...! Salmonguy

The lone speaker in the PL-360 is less than 1.5 inches, and speech is quite clear, so maybe the two speakers in the PL-390 will do OK. It sounds like the '390 has a longer ferrite rod than the '310,

0p$mn Sent via BlackBerry by AT&T

You can get a wall wart directly from the Etonstore under parts/accessories. By "lack of signal indicators" do you mean thesignal strength and signal to noise ratio? My G8 hasthis.

I found a voltage/polarity-selectable, multiple-tip, regulated and filtered 300mw one at Radio Shack for $20+. Dead quiet on my G-8. Stu