30JUN2010 WEN SFI=74-10-4 AM:DX CONDX GOOD, PM:DX CONDX BAD 102.3 WGRT PORT HURON MI ST CLAIR COUNTY 0755EDT 3K 41 MI (MI38) 101.5 WWBN TUSCOLA MI N OF FLINT,BANANA ROCKS 0817EDT 1.8K 67MI

I also use an old Razr charger on my Insignia NS-HD01, works fine. Tony in Traverse City -- Tony, N4RNI Traverse City, MI EN74dq FISTS #14949, SWLR-RN072 I'm apathetic, but I don't care

I use a BB charger on mine and it works fine. The old Motorola Razr charger works as well. However, make sure the charger plug that fits in the rx is the trapezoidal shape and not the flattened

Hello all, This has probably been answered before, but can a 5 V, 0.75 A BlackBerry charger with a mini-USB connector be used to charge the PL-380? Thanks, Gary

Thank for the linking the interesting article to our group. I don't see it mentioned, but do you know how many kilograms the super antenna weigh? Good DX. Richard. Richard Allen 36°22'51"N /

sdwillingham schreef: I have added a wire to outside. The SW gives 15dB-20dB less signal when NO ferrite is connected. I do not know how to slove this, as I sometimes listen without on hands ferrite

It sure is considering you can buy a Grundig G8 from Radio Shack for $49 or $39 if you have a $10 off coupon like I had. I use my G8 as an experimental breadboard, and also have a working portable

Hello , I can sell a used board with SI4735 chispet and USB support only ship to Europe. If you are interested send me an email directly. Ced 2010/6/30 mmaghakian <mmaghakian@...> --

this is an interesting antenna construction article I came across for MW reception http://www.sarmento.eng.br/Loop_Ferrite_Rod_Antenna.htm

$240 for a board with no case or other required cosmetic parts seems kind of high.

I've attached a long wire aerial to the whip on my PL-380. It has no benefit to medium or long wave reception. Actually it deteriorated the signal as suggested in Scott's post. A solution for

27JUN2010 SUN THUNDERSTORMS & TORNADOES AT 1500EDT 089.5 WCMU NPR MT PLEASANT MI CENTRAL MI U. 0702EDT 100KW 118 MI (MI33) 093.5 WHMI HOWELL MI LIVINGSTON COUNTYS OWN 0752EDT 5.2K 50 MI (MI34) 107.9

Thanks Scott for both answers.- FARMERIK

The whip in a PL-3X0 goes to a preamp and filter circuit for shortwave operation. There is a diode switch used to connect the output of the preamp circuit to the AM tank. In MW operation, the whip

The Si4735 is the same as an Si4734 with an added RDS/RBDS decoder and optional digital audio output interface. So RF capabilities are identical -- no SSB. -Scott-

It talks about being for use by Hams. Does it tune SSB? - FARMERIK

Do others here agree the PL-380 and the WRX 911 both connect the AM tank circuit to the whip antenna? I don't have either here, but I do have a PL 310. If this is true, than an external antenna could

OK, all I needed to do was look a littlefurther on the web site to find the bill of materials. So it is easy to see what components arenecessary.

It’s the same chip as the ChineseULRs, and I suspect that is widely available. I am concerned about othercomponents on the PCB. ========================================================== Mike

Is the the same chip as the Sony XDR-F1HD ? I presume not