|
NEW ULTRALIGHT Logging.....WPGR 1510 ..Listed as 1 Watt Nights ???
Hi Guys:
One New Ultralight Logging this morning.....New for ULR LOG but last
heard on Sept/22/1981 during a test when this station was a 250 Watt
DAYTIME only station!!
Station is listed as
Hi Guys:
One New Ultralight Logging this morning.....New for ULR LOG but last
heard on Sept/22/1981 during a test when this station was a 250 Watt
DAYTIME only station!!
Station is listed as
|
By
robert ross
·
#460
·
|
|
Re: inductive coupling
Hi Richard:
On analog sets, the tuning capacitor is never disconected from the antenna
coil, so the L-C circuit that makes the antenna resonate is always
completed. With a PLL set, a variable
Hi Richard:
On analog sets, the tuning capacitor is never disconected from the antenna
coil, so the L-C circuit that makes the antenna resonate is always
completed. With a PLL set, a variable
|
By
satya@...
·
#459
·
|
|
inductive coupling
I notice that both my digital SANGEAN PR-D5 and my analog SONY ICF-S5W and EX5 all can be tuned to a given frequency, and then used to boost a signal significantly on an ultralight tuned to the same
I notice that both my digital SANGEAN PR-D5 and my analog SONY ICF-S5W and EX5 all can be tuned to a given frequency, and then used to boost a signal significantly on an ultralight tuned to the same
|
By
lrdheat
·
#458
·
|
|
Re: Ultralight Modifications for DXpeditions
Gary,
Thanks for the excellent overview of our work in modification andupgrading ULRs this Spring/Summer. You probably intended to mentionour upcoming series of articles on modifying the E100. Gary,
Gary,
Thanks for the excellent overview of our work in modification andupgrading ULRs this Spring/Summer. You probably intended to mentionour upcoming series of articles on modifying the E100. Gary,
|
By
John H. Bryant <bjohnorcas@...>
·
#457
·
|
|
Cape Spear, Newfoundland Ultralight DXing
Hi Guys,
Took the opportunity on a beautiful evening here to run down to Cape
Spear (Most easterly point in North America ) for some sunset
ultralight dxing
Nothing new heard , but Transatlantic
Hi Guys,
Took the opportunity on a beautiful evening here to run down to Cape
Spear (Most easterly point in North America ) for some sunset
ultralight dxing
Nothing new heard , but Transatlantic
|
By
Allen Willie
·
#456
·
|
|
Re: Semi OT: Cutting Ferrite Bars?
seems like i've read that some of you have purchased these bars from
some manufacturer. if so, they may be the logical persons to answer
this question.
seems like i've read that some of you have purchased these bars from
some manufacturer. if so, they may be the logical persons to answer
this question.
|
By
ronshire2000
·
#454
·
|
|
Re: What is best method for recording DX from an ULR?
I checked out the Olympus WS100 recorder with a SRF-T615 and E100, and
am not totally satisfied with the results.
It seemed a normal listening volume overloaded the recorder a bit.
While recording
I checked out the Olympus WS100 recorder with a SRF-T615 and E100, and
am not totally satisfied with the results.
It seemed a normal listening volume overloaded the recorder a bit.
While recording
|
By
bbwrwy
·
#455
·
|
|
Re: Semi OT: Cutting Ferrite Bars?
John,
Of the few links I spotted with info on this topic, this one was the most
concise:
http://www.eng-tips.com/viewthread.cfm?qid=190262&page=4
Diamond blade cutting with lots of coolant seems to
John,
Of the few links I spotted with info on this topic, this one was the most
concise:
http://www.eng-tips.com/viewthread.cfm?qid=190262&page=4
Diamond blade cutting with lots of coolant seems to
|
By
Guy Atkins
·
#452
·
|
|
Ultralight Modifications for DXpeditions
Hello Guys,
Some DXers have inquired about the recent successin modifying the Eton E100 and other Ultralights for DXpedition use, sohere is a brief summary of the current progress.
SRF-39FP:
Hello Guys,
Some DXers have inquired about the recent successin modifying the Eton E100 and other Ultralights for DXpedition use, sohere is a brief summary of the current progress.
SRF-39FP:
|
By
Gary DeBock
·
#453
·
|
|
Semi OT: Cutting Ferrite Bars?
In the work that Gary DeBock, Guy Atkins and I are doingwith mods to the E100, I've run up against the need to reduce the lengthof the stock ferrite bar by half.
Has anybody ever done this
In the work that Gary DeBock, Guy Atkins and I are doingwith mods to the E100, I've run up against the need to reduce the lengthof the stock ferrite bar by half.
Has anybody ever done this
|
By
John H. Bryant <bjohnorcas@...>
·
#451
·
|
|
Re: New E-Skip Loggings 7/22/08
I understand its better to be at good receiver connected to a nice
rooftop and have RDS on the receiver. However the point of the
ultralight was to go to the park and enjoy DXing away from the
I understand its better to be at good receiver connected to a nice
rooftop and have RDS on the receiver. However the point of the
ultralight was to go to the park and enjoy DXing away from the
|
By
starship20012001 <starship_2001@...>
·
#450
·
|
|
Re: What is best method for recording DX from an ULR?
Kevin & Brett:
I discovered yesterday that I'd purchased an Olympus Digital Voice
Recorder WS100 a couple of years ago to record meeting notes. Because
it didn't do well I put in a drawer and forgot
Kevin & Brett:
I discovered yesterday that I'd purchased an Olympus Digital Voice
Recorder WS100 a couple of years ago to record meeting notes. Because
it didn't do well I put in a drawer and forgot
|
By
bbwrwy
·
#449
·
|
|
Re: New E-Skip Loggings 7/22/08
FM DXers would certainly benefit from something equivalent to the
spectrum-capturing receivers such as the Perseus and RFSpace SDR-IQ
that are all the rage with serious AM broadcast band DXers.
Of
FM DXers would certainly benefit from something equivalent to the
spectrum-capturing receivers such as the Perseus and RFSpace SDR-IQ
that are all the rage with serious AM broadcast band DXers.
Of
|
By
MarkWA1ION
·
#448
·
|
|
Re: New E-Skip Loggings 7/22/08
I dunno. I just can't bring myself to use an ultralight when the Es is in for FM DX. Gotta milk the opening for every station you can and that usually means the top shelf radios. I got in on the Es
I dunno. I just can't bring myself to use an ultralight when the Es is in for FM DX. Gotta milk the opening for every station you can and that usually means the top shelf radios. I got in on the Es
|
By
John Cereghin <pastor@...>
·
#447
·
|
|
Re: What is best method for recording DX from an ULR?
The Olympus seems to get 15-20 hours on a single AAA battery - I usually
just let it run for an hour or so at a time and get quite a few sessions
out of it.
73 - Kevin S
Bainbridge Island, WA
The Olympus seems to get 15-20 hours on a single AAA battery - I usually
just let it run for an hour or so at a time and get quite a few sessions
out of it.
73 - Kevin S
Bainbridge Island, WA
|
By
satya@...
·
#446
·
|
|
Re: What is best method for recording DX from an ULR?
By
Brett Saylor <bds2@...>
·
#445
·
|
|
Re: What is best method for recording DX from an ULR?
How is the Sony ICD-UX70 MP3 stereo recorder on batteries ? Also how
is Kevin's Olympus recorder (model # ?) in this respect ?
Short battery life has been a complaint with the Pogo Radio YourWay
and
How is the Sony ICD-UX70 MP3 stereo recorder on batteries ? Also how
is Kevin's Olympus recorder (model # ?) in this respect ?
Short battery life has been a complaint with the Pogo Radio YourWay
and
|
By
MarkWA1ION
·
#444
·
|
|
Re: What is best method for recording DX from an ULR?
By
Brett Saylor <bds2@...>
·
#443
·
|
|
New E-Skip Loggings 7/22/08
All loggings and notes refer to Eton E-100 stock with stock whip.
Subject: New Logging 7/22/08 New DX record
Date: Tuesday, July 22, 2008 8:25 PM
Heard on Eton E-100 barefoot at Conimciut
All loggings and notes refer to Eton E-100 stock with stock whip.
Subject: New Logging 7/22/08 New DX record
Date: Tuesday, July 22, 2008 8:25 PM
Heard on Eton E-100 barefoot at Conimciut
|
By
Norbert 26 <starship_2001@...>
·
#442
·
|
|
Re: What is best method for recording DX from an ULR?
Hi Brett:
On the Olympus model I use, if I go from the highest quality setting to
the medium quality settings, the emitted noise disappears, and at around
44,000 kbps, the fidelity still far exceeds
Hi Brett:
On the Olympus model I use, if I go from the highest quality setting to
the medium quality settings, the emitted noise disappears, and at around
44,000 kbps, the fidelity still far exceeds
|
By
satya@...
·
#441
·
|