|
Re: Gary's New 6" FSL Design
On Thu, Jul 2, 2020 at 08:09 AM, Gord Seifert wrote:
Hi guys. I am mainly a lurker here but this post forces me to ask a question. If the Q of the 1162 strand Litz is bordering on too high, why not
On Thu, Jul 2, 2020 at 08:09 AM, Gord Seifert wrote:
Hi guys. I am mainly a lurker here but this post forces me to ask a question. If the Q of the 1162 strand Litz is bordering on too high, why not
|
By
Gary DeBock
·
#29566
·
|
|
Re: Gary's New 6" FSL Design
Hi guys. I am mainly a lurker here but this post forces me to ask a question. If the Q of the 1162 strand Litz is bordering on too high, why not use 660? The price of 100 ft. of 660 is about the same
Hi guys. I am mainly a lurker here but this post forces me to ask a question. If the Q of the 1162 strand Litz is bordering on too high, why not use 660? The price of 100 ft. of 660 is about the same
|
By
Gord Seifert
·
#29565
·
|
|
Gary's New 6" FSL Design
Hi Gary,
Your new 6 inch FSL is a step towards higher gain in a relatively small package. I look forward to a YouTube review.
Regarding 1162/46 Litz wire used in the 6" FSL, what is the cheapest
Hi Gary,
Your new 6 inch FSL is a step towards higher gain in a relatively small package. I look forward to a YouTube review.
Regarding 1162/46 Litz wire used in the 6" FSL, what is the cheapest
|
By
Todd
·
#29564
·
|
|
Re: Long Term DX Project - 27/06/2020
Nope, 7SD still going.
By
Paul Blundell
·
#29563
·
|
|
Re: Demo of my newly constructed 3.5" FSL
That is a very good idea, I will try the same with mine.
That is a very good idea, I will try the same with mine.
|
By
Paul Blundell
·
#29562
·
|
|
Re: Demo of my newly constructed 3.5" FSL
On Tue, Jun 30, 2020 at 10:26 PM, Gary DeBock wrote:
Congratulations again on your success, and good luck tracking down lots of DX!Thank you Gary! It's a great way to practice the hobby anywhere.
Best
On Tue, Jun 30, 2020 at 10:26 PM, Gary DeBock wrote:
Congratulations again on your success, and good luck tracking down lots of DX!Thank you Gary! It's a great way to practice the hobby anywhere.
Best
|
By
Chuck
·
#29561
·
|
|
Re: Long Term DX Project - 27/06/2020
2CA 1053 kHz has been coming into Melb well too lately.
I take it 540 kHz 7SD has been shut down then.
Regards. Dan.
2CA 1053 kHz has been coming into Melb well too lately.
I take it 540 kHz 7SD has been shut down then.
Regards. Dan.
|
By
Dan Merta
·
#29560
·
|
|
Re: Demo of my newly constructed 3.5" FSL
Paul,
The solution is a "rubber locking tab," which is precut on one side to fit around the curved PVC fitting, and cut flat on the other side to fit up against the rubber plumbing coupler. The rubber
Paul,
The solution is a "rubber locking tab," which is precut on one side to fit around the curved PVC fitting, and cut flat on the other side to fit up against the rubber plumbing coupler. The rubber
|
By
Gary DeBock
·
#29559
·
|
|
Re: Demo of my newly constructed 3.5" FSL
Thanks Get, I have had both those issues. What are the fixes?
Thanks Get, I have had both those issues. What are the fixes?
|
By
Paul Blundell
·
#29558
·
|
|
Re: Demo of my newly constructed 3.5" FSL
<<< Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions.
FSL Antenna Demo with Tecsun PL-660This FSL uses
<<< Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions.
FSL Antenna Demo with Tecsun PL-660This FSL uses
|
By
Gary DeBock
·
#29557
·
|
|
Re: Demo of my newly constructed 3.5" FSL
Thanks, Paul!
By
Chuck
·
#29556
·
|
|
Re: Demo of my newly constructed 3.5" FSL
Awesome work.
Paul
https://ultralightradiodxing.blogspot.com/
--
Paul
Awesome work.
Paul
https://ultralightradiodxing.blogspot.com/
--
Paul
|
By
Paul Blundell
·
#29555
·
|
|
Demo of my newly constructed 3.5" FSL
Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions.
FSL Antenna Demo with Tecsun PL-660
This FSL uses 140mm
Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions.
FSL Antenna Demo with Tecsun PL-660
This FSL uses 140mm
|
By
Chuck
·
#29554
·
|
|
Long Term DX Project - 27/06/2020
Date: 27/06/2020
Time: 22:00
Location: Home, Launceston Tasmania
Notes: My first return session after a break away.
Date: 27/06/2020
Time: 22:00
Location: Home, Launceston Tasmania
Notes: My first return session after a break away.
|
By
Paul Blundell
·
#29553
·
|
|
Re: [irca] IRCA TIS/HAR LIST (Summer 2020) now posted!!
Woo Hoo!!
Mike
By
Mike Sanburn
·
#29552
·
|
|
IRCA TIS/HAR LIST (Summer 2020) now posted!!
The IRCA TIS/HAR LIST lists all US and Canadian TIS/HAR stations, by frequency,
including call letters, state (province,) city, county, licensee, address,
coordinates, expiration date, sources
The IRCA TIS/HAR LIST lists all US and Canadian TIS/HAR stations, by frequency,
including call letters, state (province,) city, county, licensee, address,
coordinates, expiration date, sources
|
By
Phil Bytheway <phil_tekno@...>
·
#29551
·
|
|
Re: New eBay Radio
Thanks, I reckon I might grab one and see how it goes.
Thanks, I reckon I might grab one and see how it goes.
|
By
Paul Blundell
·
#29550
·
|
|
Re: New eBay Radio
Hi Paul,
There were several transparent radios offered a number of years ago.
I don't think this was one of them since it supposedly has a DSP processor.
At the time I read about them one of the chief
Hi Paul,
There were several transparent radios offered a number of years ago.
I don't think this was one of them since it supposedly has a DSP processor.
At the time I read about them one of the chief
|
By
Joe
·
#29549
·
|
|
New eBay Radio
https://www.ebay.com.au/itm/AM-FM-Transparent-Pocket-Radio-Portable-Digital-LCD-Stereo-Earphone-Set/223991685304?hash=item3426f1e0b8:g:ROMAAOSwXj1ep3~Z
Any feedback on these?
https://www.ebay.com.au/itm/AM-FM-Transparent-Pocket-Radio-Portable-Digital-LCD-Stereo-Earphone-Set/223991685304?hash=item3426f1e0b8:g:ROMAAOSwXj1ep3~Z
Any feedback on these?
|
By
Paul Blundell
·
#29548
·
|
|
Re: Reception report and 1566kHz 3NE anomalies
Hi Todd.
I also have a PK loop antenna, purchased at a hamfest about 5 years ago, I find it very handy for listening to 675kHz ABC Corwa in the mornings.
I can confirm VOA Thailand does get to
Hi Todd.
I also have a PK loop antenna, purchased at a hamfest about 5 years ago, I find it very handy for listening to 675kHz ABC Corwa in the mornings.
I can confirm VOA Thailand does get to
|
By
Dan Merta
·
#29547
·
|