Finally after a few months of changed living arrangements, I now have a space for my radios. My DXing desk allows me to do focus my DXing either as shown to the North, targetting Victoria, New South

------------------------- **MWDXerDB - Report** Report Date: 05/09/2020 Report Time: 20:04:08 LOCATION: Home, Launceston, Tasmania RADIO: Digitech AR1733 / 3" FSL Aerial Freq / Name: 0558kHz -

Hi, just a technical note, all the DSP portable radios use an external circuit to receive the air band, it is not received directly from the DSP IC (usually Si4735 in our radios) The external circuit

Recently I have been looking at change / improving my Portable Ultralight Radio Go Kit. Until now I have used a few different cases and bags, some have worked really well, others have not been as

Another update: https://ultralightradiodxing.blogspot.com/2020/01/software-mwdxerdb.html -- Paul - Moderator UltralightDX

Here in Australia we are still 25kHz, I believe that Europe is 8.33kHz spacing.-- Paul - Moderator UltralightDX

Today I came across a recording of a TP DX 10-17-19. My log book show it was an unidentified signal on 702 kHz. Before deleting it I decided to give a listen. It turned out there was enough

Rémy , IIRC it has already happened. There was talk of changing from 25 to 12.5 to double the number of channels but instead they went straight to 8.33kHz effectively tripling the number. The change

Hi everyone, I read somewhere that channel spacing on the Airband is being changed from 25 to 8 kHz. Anyone know if this has been implemented anywhere already. It's likely to be a

Another good source for air band frequencies is https://skyvector.com/airports, the site also has aviation charts so you can see which airports are nearby your location, the most useful are

Great writeup. The C. Crane Skywave SSB can actually "scan" up to 10 airband frequencies in a single bank. After programming them into the bank you press both the up and down slewing buttons

Thanks, gentlemen, good info. Keith Beesley Seattle WA On Wednesday, May 6, 2020, 10:47:07 PM PDT, kevin asato <kc6pob@...> wrote:

Good quick read, Paul. Not quite ultralight as i have a desktop scanner programmed but -Depending upon where you reside, the airbands can be tough to monitor. i am fortunate to have two commercial

Hi Paul, As part of the 2015 Ultralight Radio Shootout (which is posted at https://swling.com/blog/2015/03/gary-debocks-2015-ultralight-radio-shootout-review/ I did a thorough investigation of the

As some ultralight radios also cover the VHF Airband, I have published a guide on this. http://ultralightradiodxing.blogspot.com/2020/05/airband-guide-to-airband-radio-listening.html -- Paul -

DATE: 06/05/2020 TIME: 21:35 – 22:05 LOCATION: Home, Launceston Tasmania. RADIO / AERIAL: Digitech AR1733 / 3” FSL Aerial FREQ Station SIGNAL Pw NOTES 558 kHz - 6WA weak 50k Logged @

I agree with you, Andy. This gentleman (?) has just been given the permanent boot. The kicker was that he didn't want any email delivered from the group, which makes it pretty obvious that he doesn't

Yep. Someone just joined the VLF group, posted the exact same message, but from an entirely different name/email.

00:-00:53 Opening Voice Announcement 00:53-01:48- Morse Code ID at 10 WPM 700 Hz 01:49-02:49- Sweep Tones 02:50-03:01- Telephone "Busy Signal" 03:02-03:35- Sweep Tones 03:36-04:36- "Laser Gun" Sweep

Hi all, Wonder if any other users have encountered this: display whine especially in MW thru audio when radio is held in hand. This is the freshly released black radio. I have one of the gray ones