For those interested in the resolution of this problem, Jerry's 3 inch FSL PL-380 model was received here yesterday, but it was not repairable. There were several issues, but the deal breaker was the

Here are the results of testing 1162/46 Litz (pink color, from eBay seller Ming) and 1200/46 Litz (blue color, from eBay seller in Canada, same as blue 1200/46 Litz from Chinese eBay seller) on my HP

Very useful hint, Mikek. Thanks! Michael UK --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus

I just wanted to mention my method of soldering large count litz wire.  I set a spoon on my electric stove, then melt a large drop of solder in the center of the spoon, "guessing" just under 3/8"

New version has solved some problems on the MW? see here https://imgur.com/a/c5dzHGx

Mark Connelly's doctrine of getting right up to the salt water edge was proven again during file review of daytime DXing in Macau-- a strange gambling enclave located 50 miles west of Hong Kong. On

Absolutely no arguments from me on this last bit. But really, I use the meter on the radio to point an antenna, or compare received signal strengths for logging. So an indication of r-f voltage across

On Tue, Jun 25, 2019 at 06:50 AM, Gord Seifert wrote: Gary, you are pretty much THE authority on these antennas, maybe you should offer the seller of the 1200 strand wire the opportunity to submit a

Thanks for the suggestion Phil! I suspect though that I will go with the wire Gary has been using since he has used it on a number of projects and had very good results. The 1200 strand wire is an

On Mon, Jun 24, 2019 at 04:11 PM, Gary DeBock wrote: <<< Hello, Gary - Nice looking FSL, and well-demonstrated. How would you expect the performance of the setup in the video to compare with the

RE: I still prefer a good old analog "S" meter though. Especially when calibrated properly However an "S" meter even perfectly calibrated to meet the prevailing standard for it also does not take

File review continues from the wild and wacky Hong Kong trip, featuring two daytime DX waterfront sessions, a sunset skip extravaganza with multiple Chinese onlookers and a souped-up Ultralight

<<< I found this on ebay: https://www.ebay.com/i/182880754190?chn=ps&var=690181186870 1200/46 Litz. It is NOT cheaper, but he allows you to buy in 10 foot increments. For instance 30 feet for ~$48.

<<< Hello, Gary - Nice looking FSL, and well-demonstrated. How would you expect the performance of the setup in the video to compare with the performance of a Sangean PR-D15? Rich >>> Hello

Very good and interesting information Richard. Though I have never considered the readouts on my ultralights to achieve metrology grade accuracy. Rather simply a relative indication of signal

@Gord Seifert I found this on ebay: https://www.ebay.com/i/182880754190?chn=ps&var=690181186870 1200/46 Litz. It is NOT cheaper, but he allows you to buy in 10 foot increments. For instance 30 feet

Hello, Gary - Nice looking FSL, and well-demonstrated. How would you expect the performance of the setup in the video to compare with the performance of a Sangean PR-D15? Rich

Hi Gary, Amazing antenna and very impressive demonstration. Best regards Chris

<<< Hi Gary, I have been following this 'Baby FSL' thread for a while and have seen that you have found a 384p variable that works very well for you. I have also noticed that there seem to be a

One thing I am always on the look out for is a better way to store my loggings. I have tried a number of different methods including paper logs, an eBook reader with a Qwerty keyboard and a custom