http://launcestonscanningguy.blogspot.com/2017/02/radio-go-case-february-2017.html

Asians on the band seemed pretty anemic this morning except for a wild mix on 1593, mostly dominated by the NHK2 synchros. CNR1 had the edge until around 1430, when the Japanese started going on the

Hi Does anyone have any experience With the McKay Dymek Active Antenna Control Box with other Active Antennas? http://www.prc68.com/I/DR33.shtml#DA100 The DA-100 is an active whip antenna

Hi Jordan- Those are really short, no? Only a little over 2" Even the ones I mentioned are kinda short, only 3.5" Wishful thinking, I guess, HI! 73, Joe.

http://www.goldmine-elec-products.com/prodinfo.asp?number=G19076B -- 73 Jordan VE7JJD

Found these for sale: http://www.goldmine-elec-products.com/prodinfo.asp?number=G19561A Only through tomorrow though. They should be good for a small FSL, no? I have no connection with Electronic

lol : BTW i see there is 1200/46 available now :P hint hint :O Thanks Gary and steve Dean_0

Hi Again Dean, Of course I agree with Steve about the superiority of Litz wire, which was one of the major discoveries that our experimental group made immediately after publication of Graham's

Hi Dean, Gary will have his own comments, and he's done a lot more with FSLs in the past couple years than I have. Litz wire, if large enough, is always superior to non-Litz for a

Hi : Well honestly you guys did most of the work ,but what has spurred me on is to see if i could make one that is rugged but very functional? Specs: the one i made is comprised of : 50 rods- 10 x

Hi Dean, Thanks for sharing the great news of your FSL antenna experimentation, and I'm happy that you are making progress! Steve and I were two of the original FSL experimenters after Graham's

Hi Dean, OK, sounds like you're having fun experimenting. Please remember, though, there's a lot of good info on FSLs in the Files section. Other folks have already determined

hi Steve: No i didn't use litz ,just some stranded wire i had around ,i'm thinking i'll try to use litz on the next ones ,after i've done some research about which size to use ,there is conflicting

Hi Dean O, Congrats on your new FSL! That's a serious size, 8" and should work really well for you. Did you use Litz wire for the coil? 73, Steve On 2/14/2017 7:20

Gary : I want to thank you for all your work on these fantastic loops! I think i discovered Maynards article some 4-5 years ago but only lately got the parts to finally build one for myself. Having

Hi Michael, <<< How sharp is the threefold tuning, Gary? And how sharp is nulling? >>> The tuning for even one FSL antenna is razor-sharp, so when you add another one you need to repeat the

Mega wow! How sharp is the threefold tuning, Gary? And how sharp is nulling? If the early hour produces no TP, the FSLs can double up as balanced exercise dumbells... Trying to repulse feelings of

Gary: I'm happy to see such an arrangement improves reception. In the past I've thought about trying it myself. With recent TP signal propagation I need a boost! Good DX. Richard Allen. -- This

Early morning antenna testing coincided with moderately good TP-DX conditions from 1300-1400 UTC this morning (in predawn darkness). 594, 747, 972 and 1575 were managing fair to good signals, while

Neither of these receivers are ultralight radios, and this review should not have appeared here. Richard Allen, near Perry OK USA.