Hi 670 khz Radio Rebelde, CUB, nice 1 sec gap with synchro SW 5025 khz, very clear at peaks. Pat (Beauvais)

I have for sale 2 each 7.5" X 7.5" FSL. The FSLsare wound in a 2 coil Polydoroff configuration using 660/46 Litzwire. The variable capacitors are the high Q, dual gang Russian madeunites. There are

Hi Interestingly the lower spectrum is the part that crossed the ocean this morning. 590 VOCM St Johns 600 CBNA Saint Anthony's 660 WFAN New York 1010 WINS New York Tecsun PL380 +

Hi Can,will, anyone come up with some HF designs? 73 de Jordan ve7jjd ---------- Forwarded message ---------- From: kthkit@... [loopantennas] <loopantennas@...> Date: Sun, Nov 13, 2016 at 5:26

HI Can,will, anyone come up with some HF designs? 73 de Jordan ve7jjd ---------- Forwarded message ---------- From: Yahoo Groups Updates <groupsupdates@...> Date: Sun, Nov 13, 2016 at 10:19

Hi Richard.. I have read good reviews of the 310et Why do you think the 310 is better then the 310et? Regards Hans ------ Origineel bericht ------ Van: "richarda@... [ultralightdx]"

Hi VOCM-590 clear at 02:30 UTC with news, mentions of "newfoundland" and at least 2 ID's, definitely improved with 1 khz bandwith. My first T/A under 1000 khz. I think I heard something on 1400

Hi For those of you who have hands on experience I would like to hear your opinion(s) on modifying the radio It is clear that work has to be done with a/the antenna to get full potential. My first

You're welcome, you did the heavy lifting first. I tried locating the stock ferrite bar very close/on the case. My quick experiment indicated not good. The closer it got the worse the RX. Regards Paul

Paul, Thanks for the credit you gave me in your mod article. This winter I'm going to glue an antenna mount on the top of the Vite case and mount the antenna to it much like Gary D's mods. I have to

Hi Jordan, You can certainly use the existing Twin Coil enclosure and circuit to make extensive changes and try other ideas. But you're now in the "experimenter" category and I can't

I have experience with the Twin Coil Antenna. It's a 7.5" ferrite rod tuned loop and as such performs the same as any other 7.5" ferrite rod tuned loop, for sensitivity. Its main virtue is

Hi Thank you for the timely response. Next question is your opinion on the advisability and/or feasilbility of bypassing the Twin Coil Ferrite, and using a more elaborate, powerful Ferrite Loop. Or a

Hi Do any of you have any experience with the C.Crane Twin Coil Magnetic Loop Antenna? How does it compare with the Super Loops used for ultralightdx? Is it "legal" for ultralightdx? 73 de Jordan

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ultralightdx group. File : /VT111/VT111mod.pdf Uploaded by : ferrite61

Hi Rick, It's great to hear from you again. <<< The encoder shaft on my CCrane SWP broke about that long ago and it sat gathering dust all this time on the workbench shelf. I happened to find

Hi Gary, That is a great review you did and I can tell I've missed a lot in 4 to 5 years. The encoder shaft on my CCrane SWP broke about that long ago and it sat gathering dust all

Hans: The PL-310ET is a good radio. However it's not quite as good as its predecessor the PL-310. The ETM function is nice to have, something the earlier model lacked. I've heard several Asian and

Gary's reviews are great. The newer PL-310 ET has the ETM feature I use to compare antennas and check band conditions by how many stations it finds. Each ULR DSP set is slightly different, so study

Hi Hans, The Tecsun PL-310 was one of 5 Ultralight radios thoroughly reviewed in the 2015 Ultralight Radio Shootout article, posted at