|
something under WSCR 670 tonight
About 8:25pm EST tonight (Monday, 1/26/09) I heard Judy Collins' "Send
In The Clowns" under The Score in Chicago on my new T615.
The signal peaked just as the obviously automated announcer said
About 8:25pm EST tonight (Monday, 1/26/09) I heard Judy Collins' "Send
In The Clowns" under The Score in Chicago on my new T615.
The signal peaked just as the obviously automated announcer said
|
By
Tim Davisson
·
#2333
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Hey Gary:
Thanks for the info! I look forward to the Shott-out results.
For the e100 units from "oceansno1", I presume those are known to be the
right models/serial numbers such that you get a
Hey Gary:
Thanks for the info! I look forward to the Shott-out results.
For the e100 units from "oceansno1", I presume those are known to be the
right models/serial numbers such that you get a
|
By
satya@...
·
#2332
·
|
|
Faroe Islands on 531 khz tonight
Hi Guys,
Thought I'd pass on another station coming in here tonight for you Trans-Atlantic hunters lately. Not sure with the numbers higher if this one will be possible to pull out but maybe
Hi Guys,
Thought I'd pass on another station coming in here tonight for you Trans-Atlantic hunters lately. Not sure with the numbers higher if this one will be possible to pull out but maybe
|
By
Allen Willie
·
#2331
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Of the recommended list, only the e100 has 1 khz tuning.
The CCrane SWP has 1 khz tuning: it was initially a Turkey, but Gary
DeBock recently reported that later production models seem to be
Of the recommended list, only the e100 has 1 khz tuning.
The CCrane SWP has 1 khz tuning: it was initially a Turkey, but Gary
DeBock recently reported that later production models seem to be
|
By
satya@...
·
#2329
·
|
|
Re: Calculating Reception Distance?
So-called "straight line" distance is appropriate.
Try the following sites as well:
www.indo.com/distance/
http://www.geobytes.com/CityDistanceTool.htm?loadpage
Russ Edmunds
Blue Bell, PA ( 360' ASL
So-called "straight line" distance is appropriate.
Try the following sites as well:
www.indo.com/distance/
http://www.geobytes.com/CityDistanceTool.htm?loadpage
Russ Edmunds
Blue Bell, PA ( 360' ASL
|
By
Russ Edmunds <wb2bjh@...>
·
#2328
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Kevin
Great explanation. Any other than E100 recommended recievers ULR,
starting with lowest price first and then up that have 1khz
increments ?
TX
rob
the
increments
however,
Kevin
Great explanation. Any other than E100 recommended recievers ULR,
starting with lowest price first and then up that have 1khz
increments ?
TX
rob
the
increments
however,
|
By
Rob
·
#2327
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Hi Kevin,
So far, I have purchased four E100's from"oceansno.1" on eBay, at the average cost of $18.00 (plus about $18 shipping perunit, by UPS).
Every E100 was in excellent condition,
Hi Kevin,
So far, I have purchased four E100's from"oceansno.1" on eBay, at the average cost of $18.00 (plus about $18 shipping perunit, by UPS).
Every E100 was in excellent condition,
|
By
Gary DeBock
·
#2335
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Hey Rob:
The M37V and DT400W tune in fixed 9 or 10 khz increments (you select
either one depending on where you're at in the world). As you push the
tune button, the receiver tuning jumps up and
Hey Rob:
The M37V and DT400W tune in fixed 9 or 10 khz increments (you select
either one depending on where you're at in the world). As you push the
tune button, the receiver tuning jumps up and
|
By
satya@...
·
#2326
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Kevin:
As I posted before I just missed out on Durham radio E100 sale a few
weeks ago by minutes or hours.
But to show my newness what does ".....unable to tune in 1
khz increments ..." mean? What
Kevin:
As I posted before I just missed out on Durham radio E100 sale a few
weeks ago by minutes or hours.
But to show my newness what does ".....unable to tune in 1
khz increments ..." mean? What
|
By
Rob
·
#2325
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Steve:
Thanks for the report- so far sounds very good-
rob
Steve:
Thanks for the report- so far sounds very good-
rob
|
By
Rob
·
#2324
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Hey Rob:
The DT400W is the sensitivity champ, although it is unable to tune in 1
khz increments and the stock selectivity is rather broad, especially for
TA work. There is a filter mod posted at
Hey Rob:
The DT400W is the sensitivity champ, although it is unable to tune in 1
khz increments and the stock selectivity is rather broad, especially for
TA work. There is a filter mod posted at
|
By
satya@...
·
#2323
·
|
|
Calculating Reception Distance?
What is the generally accepted way to calculate distance ( I assume
straight line/air/flying distance), or put another way, what web
calculator do most users utilize?
For instance last night 1:00 a.m
What is the generally accepted way to calculate distance ( I assume
straight line/air/flying distance), or put another way, what web
calculator do most users utilize?
For instance last night 1:00 a.m
|
By
Rob
·
#2322
·
|
|
Anyone Comments on Sangean DT400W use?
Only having the SRF-59 for 1 month as my first ULR, looking for a
digital readout ULR. Apperars from summer shootout that the Sangean
DT400W is best bet. However, can anyone comment on actually using
Only having the SRF-59 for 1 month as my first ULR, looking for a
digital readout ULR. Apperars from summer shootout that the Sangean
DT400W is best bet. However, can anyone comment on actually using
|
By
Rob
·
#2320
·
|
|
Re: MW Station and Frequency References
Dave,
I can only hope that here on the east U.S. coast , Buffalo, NY, that
I EVER log a TA station. I bookmarked the link- and will keep my
fingers crosssed.
TY,
rob
wrote:
three
Dave,
I can only hope that here on the east U.S. coast , Buffalo, NY, that
I EVER log a TA station. I bookmarked the link- and will keep my
fingers crosssed.
TY,
rob
wrote:
three
|
By
Rob
·
#2319
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Rob, Kevin and Steve,
I'll share a little information from recentUltralight hot-rodding experiments by two ex-Navy sonar technicians, thatusually prefer to work in secret (Steve R. and me).
Rob, Kevin and Steve,
I'll share a little information from recentUltralight hot-rodding experiments by two ex-Navy sonar technicians, thatusually prefer to work in secret (Steve R. and me).
|
By
Gary DeBock
·
#2330
·
|
|
Re: MW Station and Frequency References
John:
Thanks for the FCC link- bookmarked it. Will check out NRC.
I appreciate your help, and the warm welcome here!
rob
<bjohnorcas@...> wrote:
three
of
best for
constantly by my
from
clubs
John:
Thanks for the FCC link- bookmarked it. Will check out NRC.
I appreciate your help, and the warm welcome here!
rob
<bjohnorcas@...> wrote:
three
of
best for
constantly by my
from
clubs
|
By
Rob
·
#2318
·
|
|
Re: SRF-M37V and SRF-M37W-Performance differences?
John:
Last week I looked up WRTH 2009 annual and was not out yet- will
check again online. I did go to bookstore that had Passport to World
Radio 2009- but was ALL SW stuff.
I have noted the links
John:
Last week I looked up WRTH 2009 annual and was not out yet- will
check again online. I did go to bookstore that had Passport to World
Radio 2009- but was ALL SW stuff.
I have noted the links
|
By
Rob
·
#2317
·
|
|
Re: Anyone Comments on Sangean DT400W use?
Rob,
I absolutely love my DT-400W! I started out with the
SRF-59, then got the ultralight bug in a big way and
purchased the SRF-M37V. Not satisfied with its wide
selectivity against my local
Rob,
I absolutely love my DT-400W! I started out with the
SRF-59, then got the ultralight bug in a big way and
purchased the SRF-M37V. Not satisfied with its wide
selectivity against my local
|
By
Steve Ponder <n5wbi@...>
·
#2321
·
|
|
Re: SRF-M37V and SRF-M37W-Performance differences?
Kevin:
Appreciate the clarification of the M37- live in urban area
(Buffalo,NY area) and have second home 10 miles away- probably not
far enough. And have not soldered in 40 years! May get back to
Kevin:
Appreciate the clarification of the M37- live in urban area
(Buffalo,NY area) and have second home 10 miles away- probably not
far enough. And have not soldered in 40 years! May get back to
|
By
Rob
·
#2316
·
|
|
ULR Logs Jan 21-25
I've been at the dials quite a bit the past few days and my ULR log has jumped nicely and I am steadily closing in on 300 stations heard. Here is my latest batch of ULR loggings with barefoot Sony
I've been at the dials quite a bit the past few days and my ULR log has jumped nicely and I am steadily closing in on 300 stations heard. Here is my latest batch of ULR loggings with barefoot Sony
|
By
Brandon Jordan <bcdx.org@...>
·
#2315
·
|