|
Gapped ferrite FSL's
Just doing some googling on coil materials/winding methods (to see if I need to go to the expense of sourcing decent litz wire or sticking with my copper foil experiments) I found this
Just doing some googling on coil materials/winding methods (to see if I need to go to the expense of sourcing decent litz wire or sticking with my copper foil experiments) I found this
|
By
ceo@andygardner.com <ceo@...>
·
#20526
·
|
|
Re: New member from NZ
Careful... I'm lurking!
It's close enough to the 25th, to wish y'all Meri Kirihimete.
73
Theo
Careful... I'm lurking!
It's close enough to the 25th, to wish y'all Meri Kirihimete.
73
Theo
|
By
theod438 <theod438@...>
·
#20525
·
|
|
In line headphone volume control on closeout at Radio Shack
I found the ACCURIAN in line stereo 1/8th inch head phone volume control on close out for under $3 at my area Radio Shack. I have one of RS own brand, but it has a large opening around the volume
I found the ACCURIAN in line stereo 1/8th inch head phone volume control on close out for under $3 at my area Radio Shack. I have one of RS own brand, but it has a large opening around the volume
|
By
Rik
·
#20524
·
|
|
Re: ccradio twin coil ferrite AM antenna?'s- FARMERIK
There was a change in which AM BCB frequencies were buried in computer and monitor RFI when I changed from CRT to flat screen monitors. For me that was a big help, since for listening while on the
There was a change in which AM BCB frequencies were buried in computer and monitor RFI when I changed from CRT to flat screen monitors. For me that was a big help, since for listening while on the
|
By
Rik
·
#20523
·
|
|
UNID on 730 Solved by Niel Wolfish............
Hi Guys:
Niel Wolfish in Toronto just alerted me that 730 WTNT Alexandria, VA carries some Ethnic Programming on Saturday afternoons!!
I just checked their website and at the time I heard this
Hi Guys:
Niel Wolfish in Toronto just alerted me that 730 WTNT Alexandria, VA carries some Ethnic Programming on Saturday afternoons!!
I just checked their website and at the time I heard this
|
By
robert ross
·
#20522
·
|
|
ULR DX....Weird UNID @ Sunset tonight on 730 Khz........Middle Eastern???
Hi Guys:
I had something on 730 Khz tonight at Sunset that has me somewhat Baffled.........If anyone can add any info to this I'd appreciate hearing from you!!
RADIO USED..................SONY
Hi Guys:
I had something on 730 Khz tonight at Sunset that has me somewhat Baffled.........If anyone can add any info to this I'd appreciate hearing from you!!
RADIO USED..................SONY
|
By
robert ross
·
#20521
·
|
|
13 meter Reception on 21600
I know we are generally an AM/FM/LW group, but recently there has been a rather rare opportunity for reception on 21600 kHz in the 13 meter SW band. Generally the only station found here is R. Espana
I know we are generally an AM/FM/LW group, but recently there has been a rather rare opportunity for reception on 21600 kHz in the 13 meter SW band. Generally the only station found here is R. Espana
|
By
ferrite61 <dxrx@...>
·
#20520
·
|
|
Puyallup, WA Ultralight TP's for 12-22
Hello All,
Unfortunately yesterday's exceptional TP-DXing conditions didn't continue through this morning, but there were still some potent Asian signals from several Korean big guns. The weaker
Hello All,
Unfortunately yesterday's exceptional TP-DXing conditions didn't continue through this morning, but there were still some potent Asian signals from several Korean big guns. The weaker
|
By
Gary DeBock
·
#20519
·
|
|
Re: New member from NZ
I think what I like most about the ULR group is the documenting by so many members of just what is possible, and your logs show this of course Gary. The contributions of Allen Willie from Newfoundland
I think what I like most about the ULR group is the documenting by so many members of just what is possible, and your logs show this of course Gary. The contributions of Allen Willie from Newfoundland
|
By
Tony Ward
·
#20518
·
|
|
Malaysian 4 A388
Hi
[HFNPDU PERFORMANCE]
11:15:48 UTC Flight ID = MAS4 LAT 23 9 15 N LON 79 39 13 E
9M-MND A388
now on 17967 khz
Pat
Hi
[HFNPDU PERFORMANCE]
11:15:48 UTC Flight ID = MAS4 LAT 23 9 15 N LON 79 39 13 E
9M-MND A388
now on 17967 khz
Pat
|
By
patrice.privat
·
#20517
·
|
|
Re: New member from NZ
Hello Tony W., Tony K., Andy and All,
While on the subject of transplanted New Zealanders, let's not forget local Canadian DXer Theo Donnelly ("Mailbag" editor of the NZ DX Times), who somehow
Hello Tony W., Tony K., Andy and All,
While on the subject of transplanted New Zealanders, let's not forget local Canadian DXer Theo Donnelly ("Mailbag" editor of the NZ DX Times), who somehow
|
By
Gary DeBock
·
#20516
·
|
|
Re: ccradio twin coil ferrite AM antenna?'s- FARMERIK
Have you tried a flat panel with LED backlight?
They are uncommon but I would expect them to be
much quieter in RF output compared to either a
common flat panel (fluorescent backlight) or a
"real" CRT
Have you tried a flat panel with LED backlight?
They are uncommon but I would expect them to be
much quieter in RF output compared to either a
common flat panel (fluorescent backlight) or a
"real" CRT
|
By
d4g7johnson
·
#20515
·
|
|
Re: New member from NZ
Tienes razn, Antonio.
No he visto ningn conviviente Maya hoy.
Crea que slo yo (con los ovejas) haba sido dejado atrs...
Miguel-el-Vidente
Google-translator circumvent:
You're right, Tony. I haven't
Tienes razn, Antonio.
No he visto ningn conviviente Maya hoy.
Crea que slo yo (con los ovejas) haba sido dejado atrs...
Miguel-el-Vidente
Google-translator circumvent:
You're right, Tony. I haven't
|
By
Michael <michael.setaazul@...>
·
#20514
·
|
|
Re: New member from NZ
I cannot understand why people don't think the apocalypse has happened Michael. I haven't seen a Mayan all day. Have you?
Tony (VE3NO) NYAA Starfest
tonyward@...
http://www.nyaa.ca
Just discovered
I cannot understand why people don't think the apocalypse has happened Michael. I haven't seen a Mayan all day. Have you?
Tony (VE3NO) NYAA Starfest
tonyward@...
http://www.nyaa.ca
Just discovered
|
By
Tony Ward
·
#20513
·
|
|
Re: New member from NZ
By
Michael <michael.setaazul@...>
·
#20512
·
|
|
Re: New member from NZ
Whoops! I've been outed!! Welcome aboard Andy. My NZ days date back to Whangaparaoa and the Lloyd Clayden antenna farm, with big boat anchors and small War surplus lash-ups to receive with Barry
Whoops! I've been outed!! Welcome aboard Andy. My NZ days date back to Whangaparaoa and the Lloyd Clayden antenna farm, with big boat anchors and small War surplus lash-ups to receive with Barry
|
By
Tony Ward
·
#20511
·
|
|
Puyallup, WA Ultralight TP's for 12-21
Hello All,
I'm in full agreement with the comments by Bill and Walt-- this morning was easily the best TP-DX morning of the entire month. I first tuned in at 1410 and found the band full of strong
Hello All,
I'm in full agreement with the comments by Bill and Walt-- this morning was easily the best TP-DX morning of the entire month. I first tuned in at 1410 and found the band full of strong
|
By
Gary DeBock
·
#20506
·
|
|
Re: New member from NZ
Yeah, Tony, but those exploits are Racal RA17L and 1500 metre beverage related which are the opposite end of the scale to ULR's and FSL's! I'd get kicked out of the group with the first week.
I do
Yeah, Tony, but those exploits are Racal RA17L and 1500 metre beverage related which are the opposite end of the scale to ULR's and FSL's! I'd get kicked out of the group with the first week.
I do
|
By
ceo@andygardner.com <ceo@...>
·
#20508
·
|
|
Re: New member from NZ
Thanks for the welcome Rob, I look forward to contributing, hopefully positively. :)
Cheers,
Thanks for the welcome Rob, I look forward to contributing, hopefully positively. :)
Cheers,
|
By
ceo@andygardner.com <ceo@...>
·
#20510
·
|
|
Re: New member from NZ
Thanks for the welcome Gary!
I must say I've been DXing vicariously through your cliff-top stories for a while, as well as looking at your FSL experiments and that's what's actually kick-started me
Thanks for the welcome Gary!
I must say I've been DXing vicariously through your cliff-top stories for a while, as well as looking at your FSL experiments and that's what's actually kick-started me
|
By
ceo@andygardner.com <ceo@...>
·
#20507
·
|