|
Re: Inductance Meter(s) to measure 7.5 Longwave Loopstick Inductance - Where to get?
Thanks Steve, found it. Hope it measures to 1700 uh. Local Fluke meters here are about $156.00.
Thanks Steve, found it. Hope it measures to 1700 uh. Local Fluke meters here are about $156.00.
|
By
jerry_popiel
·
#15098
·
|
|
Re: PL-390 FM DX
howdy!
you're welcome. i, unfortunately, did not record the RSSI values.
awesome work! Tecsun has been informed so it would be interesting to test future versions.
regards,
phil :)
howdy!
you're welcome. i, unfortunately, did not record the RSSI values.
awesome work! Tecsun has been informed so it would be interesting to test future versions.
regards,
phil :)
|
By
just_rtfm
·
#15097
·
|
|
Re: Third Party SDR Software for Alinco DX-R8T Receiver
That sounds like a fine idea. I do not (yet) own one of the Alincos, but I have a venerable Ten Tec Omni V that has the N4PY chip, so I know Carl can shake and bake with the best. He's a nice guy, too
That sounds like a fine idea. I do not (yet) own one of the Alincos, but I have a venerable Ten Tec Omni V that has the N4PY chip, so I know Carl can shake and bake with the best. He's a nice guy, too
|
By
w4asz@bellsouth.net
·
#15096
·
|
|
Re: Tuned loop antenna
Hi Farmerik,
Yes, the PL-360's LW switching system seems designed by Rube Goldberg
himself, and it's probably best to have it all set up and running on
Longwave before heading for the beach.
Once in
Hi Farmerik,
Yes, the PL-360's LW switching system seems designed by Rube Goldberg
himself, and it's probably best to have it all set up and running on
Longwave before heading for the beach.
Once in
|
By
Gary DeBock
·
#15095
·
|
|
Re: Tuned loop antenna
I am planning on spending a few days right on the beach in Maine again this Fall, and will bring it with me. Last year for some unknown reason the '360 would not switch to receive LW while I was
I am planning on spending a few days right on the beach in Maine again this Fall, and will bring it with me. Last year for some unknown reason the '360 would not switch to receive LW while I was
|
By
Rik
·
#15094
·
|
|
SiLabs Chip Add-on for Arduino Boards
Saw this on a YG I belong to, and thought it may be of interest to some:
radio on a chipPosted by: "Ralph Brandi" dxplorer@... ralph.brandiWed Jun 29, 2011 3:43 am (PDT)
I've been playing with
Saw this on a YG I belong to, and thought it may be of interest to some:
radio on a chipPosted by: "Ralph Brandi" dxplorer@... ralph.brandiWed Jun 29, 2011 3:43 am (PDT)
I've been playing with
|
By
Guy Atkins
·
#15093
·
|
|
Re: Mexican Stations
Ginger,
I really like Fred Cantu's website ...
http://mexicoradiotv.com/frec_am.htm
He's located in San Antonio, Texas, and has a pretty good edge on Mexican AM stations. You'll see the underlined
Ginger,
I really like Fred Cantu's website ...
http://mexicoradiotv.com/frec_am.htm
He's located in San Antonio, Texas, and has a pretty good edge on Mexican AM stations. You'll see the underlined
|
By
Stephen Ponder <stephen_ponder@...>
·
#15092
·
|
|
Re: Mexican Stations
http://radio-locator.com/ has most of them.
73,
Kevin Raper
KJ4HYD
CE WCKI WQIZ WLTQ
There is no limitation to the fidelity of AM radio. From a mathematical standpoint, AM does better in frequency
http://radio-locator.com/ has most of them.
73,
Kevin Raper
KJ4HYD
CE WCKI WQIZ WLTQ
There is no limitation to the fidelity of AM radio. From a mathematical standpoint, AM does better in frequency
|
By
Kevin Raper
·
#15091
·
|
|
Re: Mexican Stations
Here's 2 links to try:
http://www.mexicoradiotv.com/
http://radiostationworld.com/Locations/Mexico/
Here's 2 links to try:
http://www.mexicoradiotv.com/
http://radiostationworld.com/Locations/Mexico/
|
By
Neil Goldstein
·
#15090
·
|
|
Mexican Stations
Is there a website that gives freq's, call signs, content ect for Mexican radio stations. I can't seem to find one, I know I'm picking up a few frequently but all I ever seem to hear is Radio National
Is there a website that gives freq's, call signs, content ect for Mexican radio stations. I can't seem to find one, I know I'm picking up a few frequently but all I ever seem to hear is Radio National
|
By
ginger_92@rocketmail.com
·
#15089
·
|
|
Re: Tuned loop antenna
<<< I have pretty much given up trying for TA LW on a ULR without an
amplified antenna. >>>
Hello Farmerik,
For receiving Longwave TA's on an Ultralight radio, you might want to
consider using your
<<< I have pretty much given up trying for TA LW on a ULR without an
amplified antenna. >>>
Hello Farmerik,
For receiving Longwave TA's on an Ultralight radio, you might want to
consider using your
|
By
Gary DeBock
·
#15088
·
|
|
Re: SRF-M37W curiosity
I have two m37W and there is no change in the battery indicator switching between AM/FM/WX on either unit.
I have two m37W and there is no change in the battery indicator switching between AM/FM/WX on either unit.
|
By
Antonios Kekalos <akekalos@...>
·
#15087
·
|
|
Re: Inductance Meter(s) to measure 7.5 Longwave Loopstick Inductance - Where to get?
Jerry - read his description page further down. He ships to Canada for $8.
Steve
WEB - "The VE7SL Radio Notebook": http://members.shaw.ca/ve7sl
Jerry - read his description page further down. He ships to Canada for $8.
Steve
WEB - "The VE7SL Radio Notebook": http://members.shaw.ca/ve7sl
|
By
Steve McDonald
·
#15086
·
|
|
Re: 1710 kc last night
Listened again last night with surprising results.
I heard the 3rd harmonic of KLIF 570 on 1710 (and even stronger on 1700). It was a stronger signal on 1700 than it was on 570!
The previous
Listened again last night with surprising results.
I heard the 3rd harmonic of KLIF 570 on 1710 (and even stronger on 1700). It was a stronger signal on 1700 than it was on 570!
The previous
|
By
Steve KT5H
·
#15085
·
|
|
Re: SRF-M37W curiosity
Thanks, Richard.
I took another look at it last night.
This time, there was no change between MW & FM, but the indicator dropped from 3 segments to 1 segment when I switched to weather band.
When
Thanks, Richard.
I took another look at it last night.
This time, there was no change between MW & FM, but the indicator dropped from 3 segments to 1 segment when I switched to weather band.
When
|
By
Steve KT5H
·
#15084
·
|
|
Re: SRF-M37W curiosity
I own several M37V/W receivers and thereis no change in the battery indicator switching from AM to FM bands.
Good DX.
Richard.
Richard Allen
36°22'51"N /97°26'35"W
(near Perry OK USA)
I own several M37V/W receivers and thereis no change in the battery indicator switching from AM to FM bands.
Good DX.
Richard.
Richard Allen
36°22'51"N /97°26'35"W
(near Perry OK USA)
|
By
bbwrwy
·
#15083
·
|
|
Re: Inductance Meter(s) to measure 7.5 Longwave Loopstick Inductance - Where to get?
Thanks for the quick reply Steve. Found the DM 4070 on ebay, but unfortunately it looks like it only ships to USA but Not to Canada where I reside.
Thanks for the quick reply Steve. Found the DM 4070 on ebay, but unfortunately it looks like it only ships to USA but Not to Canada where I reside.
|
By
jerry_popiel
·
#15082
·
|
|
Re: Inductance Meter(s) to measure 7.5 Longwave Loopstick Inductance - Where to get?
I've mentioned a decent LCR meter I've used, before on this list. Not many ULR folks are interested in measuring inductance, however.
The Chinese DM4070 model LCR meter works well; I've compared it
I've mentioned a decent LCR meter I've used, before on this list. Not many ULR folks are interested in measuring inductance, however.
The Chinese DM4070 model LCR meter works well; I've compared it
|
By
Steve Ratzlaff <steveratz@...>
·
#15081
·
|
|
Re: PL-390 FM DX
Phil, thanks for review
Are you record RSSI (dBu) for yours 88 stations?
It will be interesting to see it in table with SNR.
My tests show that Stereo switch off not only due to SNR<11dB, but
Phil, thanks for review
Are you record RSSI (dBu) for yours 88 stations?
It will be interesting to see it in table with SNR.
My tests show that Stereo switch off not only due to SNR<11dB, but
|
By
Mike Lukinov
·
#15080
·
|
|
Inductance Meter(s) to measure 7.5 Longwave Loopstick Inductance - Where to get?
I've been reading Gary DeBock's writeups on building that excellent 7.5 inch Ferrite Bar Loopstick. Now that my PL 380 is in shipping from China I am wondering what type of Inductance Meter can be
I've been reading Gary DeBock's writeups on building that excellent 7.5 inch Ferrite Bar Loopstick. Now that my PL 380 is in shipping from China I am wondering what type of Inductance Meter can be
|
By
jerry_popiel
·
#15079
·
|