Phil, thanks for review Are you record RSSI (dBu) for yours 88 stations? It will be interesting to see it in table with SNR. My tests show that Stereo switch off not only due to SNR<11dB, but

I've been reading Gary DeBock's writeups on building that excellent 7.5 inch Ferrite Bar Loopstick. Now that my PL 380 is in shipping from China I am wondering what type of Inductance Meter can be

Hello To All, Trans-Atlantic signals continue to be decent here in the North Atlantic. Making much later appearances due to later daylight the following stations were heard over the past few

I have one in the mail.... That will be interesting to check out with a meter. Mark Barnett N8PGV GET SWABBED!!! Save a Life by becoming a bone marrow donor. A child near YOU is DYING for a

Networkradio.com seems to be related to 2 FM stations. I'm wondering if this is a pirate. Possibly "The Big Q" which uses 1710

1710 kc, 0221 UT, 28 June 2011 EE male, mention of networkradio.com, east/west orientation from central Arkansas heard on SRF-M37W, stock & barefoot Was it a ghost, or did I really hear it?! I'll

I would like to hear more about your spiral loop antenna, such as the wire you used, and the spacing between turns. I also experimented with diamond weave and rook wound coils of 10-12 inches on both

When I awoke this morning, there were way too many lightning crashes on the MW band here, so I tuned to the weather band to listen to the forecast. In doing so, I noticed that the battery indicator

Since the Alinco DX-R8T/E receiver has been discussed previously on the ultralightdx Yahoo group, I thought that the following might be of interest to the

Great Rob! Thanks. Sounds really easy. I will email you the logs in the format you mentioned and just put it all in the body of the email. Thanks again! John

On 28/06/2011 11:11 AM, jlochey wrote: Hello John: I'm the guy you send your award submissions to for ULR AWARDS!!!! Just send them by Email to me at ....................

Hey everyone, I believe I understand how to format my loggings for submission to our award system, but who should I submit them to? Or how should I submit them? Thanks! John

Hi Nick, If you are handy with a soldering iron, the PL-310 is very simple to modify for external antennas. See the group files section for the "Laurie" mod to the PL-310. The PL-380 mod is more

Thanks for all the great comments -especially re the USB setup. Ordered my pl 380 tonight.

I have had my PL-360 on my 2 and 4 foot air cores and they work well, but are not nearly as narrow a pattern as ferrite loops. - FARMERIK

Hi, I've looked at some of the amazing ferrite rod antennas for ultralights. Has anybody tried a tuned loop antenna in place of the ferrite rod, letting the si4734 do the tuning rather than a

My PL380 arrived today. Came with US outlet USB power adaptor (100-240v) and UK-US converter. These were extras in the packaging along with a USB cable and 3x 3000mA ni-mh cells. Ebay seller was

Eggsactly. It also means that Tecsun doesn't have to worry about different wall warts for different markets or UL certification in the US. Lowers their shipping weight, too, which adds up when you

Mini B to standard USB cables are quite common even though the new standard is Micro B, and can be found even at the dollar stores. Also, stores like WalMart carry universal cellphone chargers with

Le 27/06/2011 22:39, Michael a écrit : Hi, Same for me with the PL390. You can use any USB compatible power source (computer, AC-to-USB adaptor)... Charly