|
Re: Grundig mini 300
Sounds like a safe bet on the mini 400 as well then.
RadioShack just started selling them: http://www.radioshack.com/product/index.jsp?productId=4394908#
---- D1028Gary@... wrote:
Sounds like a safe bet on the mini 400 as well then.
RadioShack just started selling them: http://www.radioshack.com/product/index.jsp?productId=4394908#
---- D1028Gary@... wrote:
|
By
dmccorm@...
·
#10572
·
|
|
Re: Grundig mini 300
I find my Mini 300 to be more difficult to tune than my WRX 911. That fact alone keeps it on the shelf.
I find my Mini 300 to be more difficult to tune than my WRX 911. That fact alone keeps it on the shelf.
|
By
Antonios Kekalos <akekalos@...>
·
#10571
·
|
|
Re: Grundig mini 300
Buy aTecsun PL-310, PL-380 or PL-390 on eBay from Anon (Joyce).
The390 is not an ultralight.
Theyare the bang per buck radios currently.
K
Buy aTecsun PL-310, PL-380 or PL-390 on eBay from Anon (Joyce).
The390 is not an ultralight.
Theyare the bang per buck radios currently.
K
|
By
Keith Rennie <krennie@...>
·
#10569
·
|
|
Grundig mini 300
Hi all!
I have been looking for a new ULR on eBay, and I stumbled on this scanner-looking receiver. I missed it on account of my job, and I was wondering what others thought of it; if it's worth
Hi all!
I have been looking for a new ULR on eBay, and I stumbled on this scanner-looking receiver. I missed it on account of my job, and I was wondering what others thought of it; if it's worth
|
By
Scott Macatee
·
#10568
·
|
|
Re: Grundig G6
I do agree Steve. Not only has Eton slipped on QC, they also stopped publishing "real-radio" specs. Personally, I think thats a profit-motivated strategy at the consumer's expense. Eton/Grundig have
I do agree Steve. Not only has Eton slipped on QC, they also stopped publishing "real-radio" specs. Personally, I think thats a profit-motivated strategy at the consumer's expense. Eton/Grundig have
|
By
ferrite61 <dxrx@...>
·
#10567
·
|
|
Re: Grundig G6
Yes but I can do that on any of my 3 ULR's, including the el-cheapo R-911. Its APITA on it but doable. (Re: my old comments on the R-911's 'station locking'. The WRX-911 didn't grab as strongly, and
Yes but I can do that on any of my 3 ULR's, including the el-cheapo R-911. Its APITA on it but doable. (Re: my old comments on the R-911's 'station locking'. The WRX-911 didn't grab as strongly, and
|
By
ferrite61 <dxrx@...>
·
#10566
·
|
|
Re: Tecsun PL 360 and Degen DE 1105
It has to be reprogrammed to accept a toggle condition (on/off) and add the switch. Someone months back was tearing apart the Si4734 to see if it was indeed reprogrammable. If I recall correctly,
It has to be reprogrammed to accept a toggle condition (on/off) and add the switch. Someone months back was tearing apart the Si4734 to see if it was indeed reprogrammable. If I recall correctly,
|
By
ferrite61 <dxrx@...>
·
#10565
·
|
|
Re: New logs from Connecticut
540 WLIE daytime like its a local. At nite it nearly dissapears.
The 1040//1050 is Flemington, NJ and qualifies as a repeater. Can only hear it at nite. You're right about CJMS. Its in the null nicely
540 WLIE daytime like its a local. At nite it nearly dissapears.
The 1040//1050 is Flemington, NJ and qualifies as a repeater. Can only hear it at nite. You're right about CJMS. Its in the null nicely
|
By
ferrite61 <dxrx@...>
·
#10564
·
|
|
Re: Grundig G6
Hi Powell,
This is very a very interesting insight. If this is the cause of some peoples issues with the G6 then it may be a poor design choice by Eton/Grundig that some would say is a badly
Hi Powell,
This is very a very interesting insight. If this is the cause of some peoples issues with the G6 then it may be a poor design choice by Eton/Grundig that some would say is a badly
|
By
pblake84
·
#10563
·
|
|
Re: Grundig G6
Hi Guys,
These recent opinions on the G6 correlate well to the mixed reviews I have found for the G6 (and the G3 for that matter). It seems to me that quality control is an issue for the recent
Hi Guys,
These recent opinions on the G6 correlate well to the mixed reviews I have found for the G6 (and the G3 for that matter). It seems to me that quality control is an issue for the recent
|
By
pblake84
·
#10562
·
|
|
Re: Grundig G6
If you will notice, on battery the G6 runs on 3 volts, but the WalWart is 4.5 volts. It really works MUCH better on 4.5 volts instead of 3.
Powell
NNNN
POP email is powell at backroads DOT
If you will notice, on battery the G6 runs on 3 volts, but the WalWart is 4.5 volts. It really works MUCH better on 4.5 volts instead of 3.
Powell
NNNN
POP email is powell at backroads DOT
|
By
Powell
·
#10561
·
|
|
Re: Grundig G6
I hate to tell you this guys, but my G6 Buzz edition beats my G8 in the AM and shortwave band barefoot. Even after alignment of the stock G8 loopstick for the BCB. I listen to WGN and WBBM regularly
I hate to tell you this guys, but my G6 Buzz edition beats my G8 in the AM and shortwave band barefoot. Even after alignment of the stock G8 loopstick for the BCB. I listen to WGN and WBBM regularly
|
By
dmccorm@...
·
#10560
·
|
|
Re: Tecsun PL 360 and Degen DE 1105
ferrite61 schreef:
Ho .. Wait, I must have missed a message here... How can you adapt the 310 so that soft mute is always off?
Thanks,
Marc
--
What's on Shortwave guide: choose an hour,
ferrite61 schreef:
Ho .. Wait, I must have missed a message here... How can you adapt the 310 so that soft mute is always off?
Thanks,
Marc
--
What's on Shortwave guide: choose an hour,
|
By
gratiscomputer <gratiscomputer@...>
·
#10559
·
|
|
Re: Grundig mini 300
Hi Scott,
The Grundig Mini 300 was purchased last year as a possible contestant forthe 2009 Ultralight Shootout, but failed to make the final group becauseof poor AM sensitivity.
It did provide a
Hi Scott,
The Grundig Mini 300 was purchased last year as a possible contestant forthe 2009 Ultralight Shootout, but failed to make the final group becauseof poor AM sensitivity.
It did provide a
|
By
Gary DeBock
·
#10570
·
|
|
Re: New logs from Connecticut
I just started logging things the last 6 months or so after being away forver.
From expereience something different can always show up over time.
BUT the congestion of stations here on the AM is
I just started logging things the last 6 months or so after being away forver.
From expereience something different can always show up over time.
BUT the congestion of stations here on the AM is
|
By
terribly wet
·
#10558
·
|
|
Re: New logs from Connecticut
hmmm..You hear 1050 on 1040 ? It voids most 1040 dxing here.
I sometimes away from this area where 1050 NY is weaker I do pick up a weak station 1040 with country and almost sounds like an 'ethnic
hmmm..You hear 1050 on 1040 ? It voids most 1040 dxing here.
I sometimes away from this area where 1050 NY is weaker I do pick up a weak station 1040 with country and almost sounds like an 'ethnic
|
By
terribly wet
·
#10557
·
|
|
Re: Grundig G6
Thanks to Tony and Keith for the info regarding the G6. My Sony 2010 is not much on the air band unless you are at an airport. Including the air band in radios must've been included to give an
Thanks to Tony and Keith for the info regarding the G6. My Sony 2010 is not much on the air band unless you are at an airport. Including the air band in radios must've been included to give an
|
By
Rick Robinson <w4dst@...>
·
#10556
·
|
|
Re: New logs from Connecticut
From what I see on the web it seems an AM'er in the Carribbean is rare. BUT I'm not sure these websites list everything--
If anybody is old enough they can remember a number of Caribbean stations
From what I see on the web it seems an AM'er in the Carribbean is rare. BUT I'm not sure these websites list everything--
If anybody is old enough they can remember a number of Caribbean stations
|
By
terribly wet
·
#10555
·
|
|
Re: Tecsun PL 360 and Degen DE 1105
Hi Kevin,
Thanks for the correction. I interpreted sentence 2 to not specifically disqualify SSB, only saying that it is usually not, actually never, included in an entertainment radio.
While it
Hi Kevin,
Thanks for the correction. I interpreted sentence 2 to not specifically disqualify SSB, only saying that it is usually not, actually never, included in an entertainment radio.
While it
|
By
Rick Robinson <w4dst@...>
·
#10554
·
|
|
Re: Anyone used a spiral wound coil as an antenna?
I too used a spiral loop for a while, but it was a broadband design based on the Wellbrook ALA100 (mounted on an antenna rotor). I eventually went back to a single turn loop for the ALA100, as the
I too used a spiral loop for a while, but it was a broadband design based on the Wellbrook ALA100 (mounted on an antenna rotor). I eventually went back to a single turn loop for the ALA100, as the
|
By
Guy Atkins
·
#10553
·
|