Date   

Re: PL330 battery discharge time

Matt M0LMK
 

I have a 1 month old PL330. I will charge fully today and start an endurance test tomorrow. Will post back with the results.

Matt
M0LMK/KI5GXV


3 inch FSL Loop Construction

Mike Wolfson <nwhkr319@...>
 

Are there any videos or step by steps and parts lists available detailing how to build  one of these antennas ?  is it possible to buy a pre


Ultralight Radio with Youloop

Mike Wolfson <nwhkr319@...>
 

Saw one message from Jan about using a Youloop with an ultralight receiver. Did not see anything about the results.  Has anyone used this combination ? Heard any stories ?

Mike


MW compilation Barefoot Tecsun PL-398MP from 03:31 UTC 10 08 2021

Peter 1956
 

1. 1503 talkSPORT UK 2. 855 RNE Spain (ID) 3. 1296 COPE Spain 4. 1380 Rádio Itaí Brazil https://youtu.be/nyRnLVlDk90 Peter Botswana


Re: Group Stats

Gary DeBock
 

The activity of a group doesn't necessarily correlate with the number of posts on the group list. There are plenty of active members who don't post frequently, or who don't wish to post anything unless they are sure it is helpful to others. To be honest, posting for the sake of posting has resulted in quite a few group members who have recently decided to leave our group, who feel that most of the posts are of little use to them. This can be avoided by ensuring that posts contain useful information, which others consider relevant and helpful.

Gary DeBock (in Puyallup, WA, USA)

 


Re: 2021 Ultralight Radio Shootout Review Ready for Download

Gary DeBock
 

On Mon, Aug 9, 2021 at 08:25 PM, Frank Standford wrote:
I have only just come across this. You must have spent a huge amount of time working on this. It is a good read and has given me some ideas of radios to look at.
Thanks Frank,

Major Ultralight Radio reviews like this take place every few years, with detailed articles written in 2009, 2015 and 2021. The 2015 Shootout review (with several models still offered for sale) is posted at Gary DeBock’s 2015 Ultralight Radio Shootout Review | The SWLing Post

Gary DeBock (in Puyallup, WA, USA)


Re: How Do You Record???

Paul Blundell
 

All of mine are 9k but it wouldn't be hard to create a 10khz one if one does not already exist on the group.


On Tue, 10 Aug 2021, 13:24 Frank Standford, <dxer2k1@...> wrote:
I can see a couple of 9k spacing logs sheets, does anybody have a 10k one?


Re: Group Stats

Paul Blundell
 

Not sure. I was not as active in the group during that time.


On Tue, 10 Aug 2021, 13:23 Frank Standford, <dxer2k1@...> wrote:
It looks like 2016, 2017 and 2018 were not as active years, any reason why?


Re: Retekess V-115 FM/AM/SW Radio Review – July 2021

Paul Blundell
 

Let us know how it works for you.


On Tue, 10 Aug 2021, 13:23 Frank Standford, <dxer2k1@...> wrote:
Mine has arrived, on the charger now.


Re: Software - MWDXerDB

Paul Blundell
 

Thanks Frank. Are you using Windows 10?


On Tue, 10 Aug 2021, 13:22 Frank Standford, <dxer2k1@...> wrote:
I have tried this myself and it works fine.


Re: File /LTDXProject_Aug2021.PDF uploaded #file-notice

Paul Blundell
 

Just a new DX challenge I am starting soon.


On Tue, 10 Aug 2021, 13:22 Frank Standford, <dxer2k1@...> wrote:
What is this for? I assume you are going to be posting more details of this?


Re: 2021 Ultralight Radio Shootout Review Ready for Download

 

I have only just come across this. You must have spent a huge amount of time working on this. It is a good read and has given me some ideas of radios to look at.


Re: How Do You Record???

 

I can see a couple of 9k spacing logs sheets, does anybody have a 10k one?


Re: 855 Spain RNE Murcia Barefoot Etón Elite Traveler 04:24 UTC 8th Aug 2021

Peter 1956
 

Santander is much farther away from here than Murcia anyway.

Peter


Re: Retekess V-115 FM/AM/SW Radio Review – July 2021

 

Mine has arrived, on the charger now.


Re: Group Stats

 

It looks like 2016, 2017 and 2018 were not as active years, any reason why?


Re: Software - MWDXerDB

 

I have tried this myself and it works fine.


Re: File /LTDXProject_Aug2021.PDF uploaded #file-notice

 

What is this for? I assume you are going to be posting more details of this?


File /LTDXProject_Aug2021.PDF uploaded #file-notice

main@UltralightDX.groups.io Notification <noreply@...>
 

The following files have been uploaded to the Files area of the main@UltralightDX.groups.io group.

By: Paul Blundell <tanger32au@...>


Re: Software - MWDXerDB

Paul Blundell
 

What are the errors? 
If you can send me this file "MWDxerDB.log" it will help me find the issues.

On Mon, Aug 9, 2021 at 11:57 PM Harold Cheetham via groups.io <hcheetham=yahoo.com@groups.io> wrote:
when I run the program it gives me errors and Basic closes the program

Harold Cheetham




On Monday, August 9, 2021, 08:52:07 AM EDT, Paul Blundell <tanger32au@...> wrote:


All custom coded, it does not use SQL Server.

On Mon, 9 Aug 2021, 15:54 Frank Standford, <dxer2k1@...> wrote:
What does it use for the database? Is it SQL based? I have some people who might be able to help.
 
 
Sent: Monday, August 09, 2021 at 12:00 PM
From: "Paul Blundell" <tanger32au@...>
To: main@ultralightdx.groups.io
Subject: Re: [UltralightDX] Software - MWDXerDB
No, each logging / record is separate in the database so you can't edit multiples at once. I did look at adding this in but the database would not work that way.
 
On Mon, Aug 9, 2021 at 9:38 AM Frank Standford <dxer2k1@...> wrote:
Can you edit multiples at once?
 
 
Sent: Friday, August 06, 2021 at 7:49 PM
From: "Paul Blundell" <tanger32au@...>
To: main@ultralightdx.groups.io
Subject: Re: [UltralightDX] Software - MWDXerDB
When you select edit, it asks if you want to update this. You can then edit any of the fields you want.
 
On Fri, 6 Aug 2021, 16:38 Frank Standford, <dxer2k1@...> wrote:
So that pops up when you go to edit an entry? Can you edit just this or do you have to edit all the fields?
 
 
Sent: Friday, August 06, 2021 at 2:14 PM
From: "Paul Blundell" <tanger32au@...>
To: main@UltralightDX.groups.io
Subject: Re: [UltralightDX] Software - MWDXerDB
Update: 06/08/2021
I have updated my code to also include the signal level in the formula for working out the ULDXIndex number and added an option to only update this when you want to, before this it would prompt you to update the values every time you edited a record.
 
 
 
 
 
 
 

 

 

 

 

 
 
--
Paul
 



--
Paul

461 - 480 of 32514