Re: ULDXIndex - A Suggestion


Paul Blundell
 

In MWDXerDB, I have used these values for the different signal levels.
Poor = 1.1
Weak = 1.4
Average = 1.9
Good = 2.4
Excellent = 3

The formula I use is: Distance/ Power * SignalLevel = ULDXIndex

These were only some rough figures, I am happy to adjust these to ensure it is a fair system.

On Thu, Aug 5, 2021 at 12:55 PM Frank Standford <dxer2k1@...> wrote:
Sorry if I have missed it but what are you using to increase the value? It seems to not be a standard jump between signal levels? The second graph to me seems to make more sense.
 
 
Sent: Thursday, August 05, 2021 at 11:39 AM
From: "Paul Blundell" <tanger32au@...>
To: main@UltralightDX.groups.io
Subject: [UltralightDX] ULDXIndex - A Suggestion

Following some discussions on here and my own experiences, I have added an extra value to account for signal level. This rates the signal from poor, weak, average, good and excellent and assigned a value to this. It is weighted so that as the signal level improves, the ULDXIndex also increases. Below are some examples to show how it works.

The last five entries shows how the index value increases as the signal level improves. 




This is another example but in this case the jump between the signal levels is greater. Does this better reflect the challenges of "pulling in" signals at greater signal levels?
 



--
Paul

Join main@UltralightDX.groups.io to automatically receive all group messages.