Note: groups.io will be down for maintenance on Monday, September 26th, starting at 9AM Pacific Time (4PM Monday September 26, 2022 UTC), for approximately one hour.
- Demo of my newly constructed 3.5" FSL
Re: Demo of my newly constructed 3.5" FSL
toggle quoted messageShow quoted text
Thanks Get, I have had both those issues. What are the fixes?
<<< Here's a quick demo of my newly constructed 3.5" FSL. Reception is of the clear channel 50K watt station CFZM in Toronto under poor conditions.
FSL Antenna Demo with Tecsun PL-660This FSL uses 140mm x 8mm rods from a different source since sufficient quantity weren't available from the eBay seller.
Awesome job, Chuck. You obviously aced the 3.5" FSL construction project, and I'm honored to have provided the plans!
By the way, that size of FSL antenna is ideal as a travelling DX companion, either on the road, or as a TSA-friendly overseas DXing antenna (once the Pandemic is over). Craig Barnes from Colorado has used a similar model to track down tons of TP-DX on ocean beaches here in Washington state, along with his PL-380.
There have been a couple of minor improvements made in that model since the construction plans were published, which I'll share with anyone interested (related to stopping unwanted ferrite sleeve rotation, and stopping the ferrite rods from sliding horizontally back and forth during travel).
Congratulations again on your success, and good luck tracking down lots of DX!
73, Gary DeBock (in Puyallup, WA, USA)
Join main@UltralightDX.groups.io to automatically receive all group messages.