Re: DIY - Ultralight Radio Carry Case
That is a 7.5" loopstick for MW which Gary built for me, it works very well :)
From: Myamiphil myamiphil@... [ultralightdx]
Sent: 30/11/2014 3:26 PM
Subject: Re: [ultralightdx] DIY - Ultralight Radio Carry Case
Nice job Paul...
I notice you have a larger coil on your pl380. Is that optimized for LW? my 380 has a smaller wrap on the left of the rod.
Lat: 40.8367633 Long: -74.1768412
From: "tanger32au@... [ultralightdx]" To: ultralightdx@...
Sent: Saturday, November 29, 2014 10:56 PM
Subject: [ultralightdx] DIY - Ultralight Radio Carry Case
Back in March 2014 I designed and built a custom "stealth ultralight dxing bag", this was designed to carry my 7.5" loopstick Tecsun PL-380 ultralight radio, my AR1733 radio and the various other bits and pieces I carry for portable ultralight dxing sessions. The details of this can be seen here: (http://ultralightdxing.blogspot.com.au/2014/03/diy-stealth-ultralight-dxing-bag.html)
Since recently returning to the ultralight DXing hobby after a few months being away, I decided to try and find a better carry solution, while the bag served me well and was cheap at around a $50 total cost, I have changed my approach and having to carry a separate bag (especially when also carrying other bags) became an issue to the point that I stopped carrying it as often.
Yesterday while shopping at our local Ship Loads I came across this case: (http://www.dinga.com.au/tackle-box-jw-197-utility-box-large.html) for $9.95. When I returned home I found that it was the perfect size, however the foam sheet I had at home that I was planning on using for this was about 1cm too small the whole way around.
After going to Bunnings to try and find some suitable foam and not having any luck, I happened to call past Kmart on the way home and found a Yoga block for $6 which was the perfect size.
When I returned home I sat down to work on it and within 3/4 of an hour I had the case set up how I wanted it. Materials used were:
- Jarvis Walker 197 Utility Box Large: $9.95
- Yoga form block: $6
- Black tape: $2.95
- Bubble wrap: $0.50
The foam block was cut to suit the size of the case and then I cut out sections to allow me to securely store both my AR1733 and 7.5" loopstick Tecsun PL-380 ultralight radios plus my aerial, notepad, pens and ear phones. This fits nicely in my backpack where I keep my logs sheets and larger accessories. It is still very
stealthy and much easier to carry. I am really happy with how well this has turned out and for under $20 it is great value.